We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1 metre SFF8643 host cable splitting to four angled SATA connectors with braided sleeve and labelled latches

SMUGDESK

SMUGDESK 1M SFF8643 Host to 4x SATA Angle Cable

SKU CH-AV28-5B14E

Connects one SFF8643 host port to four SATA drives at 12Gbps with angled locking connectors

  • 12 Gbps throughput for four SATA drives
  • Angled SATA plugs fit tight server chassis
  • Braided mesh sleeve cuts interference
  • Latching connectors with P1-P4 labels
  • Host-side SFF-8643 only, not for backplane

Host to Four SATA Breakout

This one-metre internal cable converts a single SFF8643 host port on a RAID controller or motherboard into four independent SATA target interfaces. It lets you connect up to four SATA hard drives or solid-state drives with one cable run. The design suits server, NAS, workstation and RAID storage builds where a compact breakout is needed.

Check Port Type and Orientation

Verify that your controller or motherboard provides an SFF8643 host port; this cable will not work with an SFF8643 backplane port. Confirm the angled SATA connectors fit your drive bays and that the latching mechanism clears surrounding components. Ensure your drives are SATA III devices to match the supported link speed.

Replaces Four Separate Cables

The breakout replaces four individual SATA cables with a single shielded assembly, reducing clutter and improving airflow in tight chassis. The jump is worth it when you need to populate four drives from one controller port while keeping cable routing tidy and maintaining stable 12 Gbps signal performance.

Highlights

  • 12 Gbps throughput for four SATA drives
  • Angled SATA plugs fit tight server chassis
  • Braided mesh sleeve cuts interference
  • Latching connectors with P1-P4 labels
  • Host-side SFF-8643 only, not for backplane

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable include the four SATA drives or do I need to buy them separately?

The cable only provides the SFF8643 to four SATA breakout connection; drives must be purchased separately.

Should I choose a different length or connector style for my RAID card?

This model is a 1meter angled breakout cable; other lengths or straight connectors are not offered in this listing.

Will I see the full 12Gbps speed on my SATA III SSDs once installed?

The cable supports up to 12Gbps signalling, but SATA III drives are limited to 6Gbps, so actual throughput will not exceed the drive's native speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.