We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1m Mini SAS SFF8087 to four left-angled SATA breakout cable

SMUGDESK

SMUGDESK 1m Mini SAS SFF8087 to 4×LeftAngle SATA 12Gbps Cable

SKU CH-5YPD-V25M8

Converts one SFF8087 Mini SAS port into four left-angled SATA connectors for 12Gbps multi-drive server storage

  • Converts one SFF8087 Mini SAS port into four left-angled SATA connectors for multidrive internal server connections
  • Supports 12Gbps ultrahighspeed data transfer, ideal for HDDs, SSDs, RAID arrays and enterprise storage backplanes
  • Left-angle SATA plugs optimise space-saving routing in tight server chassis, improving airflow and cable management
  • 1m (39.37in) medium length suits standard rackmount servers and medium-distance internal storage wiring scenarios
  • Heavy-duty breakout harness with shielded low-loss wiring ensures stable long-term signal transmission

Mini SAS SFF8087 Breakout Harness

This 1m internal cable converts a single SFF8087 Mini SAS port into four leftangled SATA connectors. It delivers 12Gbps bandwidth for multidrive server and storage backplane connections. The leftangle plugs allow tidy routing inside tight chassis, helping airflow and cable management. It is built with shielded lowloss wiring for stable longterm signal transmission.

Server and RAID Builders Seeking Dense SATA

Suits administrators wiring RAID controllers, NAS units or enterprise storage arrays that need four SATA drives from one SAS port. The leftangle design eases installation in crowded rackmount bays where straight plugs would block adjacent slots. Builders who need rightangle or straight SATA ends, or who require a different breakout count, should look at alternative harnesses.

Fits Standard 1m Internal Runs Between Controller

The 39.37in length matches typical rackmount server distances from a RAID card to a drive cage or backplane. It needs a free SFF8087 Mini SAS port on the host controller and four SATA drives or a compatible backplane. The harness frees up PCIe slots by consolidating four drive links into one SAS connection.

Highlights

  • Converts one SFF8087 Mini SAS port into four left-angled SATA connectors for multidrive internal server connections
  • Supports 12Gbps ultrahighspeed data transfer, ideal for HDDs, SSDs, RAID arrays and enterprise storage backplanes
  • Left-angle SATA plugs optimise space-saving routing in tight server chassis, improving airflow and cable management
  • 1m (39.37in) medium length suits standard rackmount servers and medium-distance internal storage wiring scenarios
  • Heavy-duty breakout harness with shielded low-loss wiring ensures stable long-term signal transmission

Specifications

No published specifications for this item yet.

Questions about this item

Do I need a RAID controller or HBA with an SFF-8087 port to use this cable?

Yes, the SFF-8087 end plugs into a controller or HBA that provides a Mini SAS port; the four left-angled SATA plugs then connect your drives.

Will this cable work with 6Gbps SATA drives I already own?

The harness supports 12Gbps bandwidth and is backward compatible, so your existing 6Gbps SATA HDDs or SSDs will operate at their native speed.

How can I verify the link is running at 12Gbps after installation?

Check the controller BIOS or management utility; it should report each attached drive negotiating a 12Gbps SAS/SATA link rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.