We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1-metre Mini SAS HD breakout cable SFF-8643 to SFF-8482 29-pin with SATA power

SMUGDESK

SMUGDESK 1M Mini SAS HD Breakout Cable SFF-8643 to SFF-8482 29Pin SATA Power

SKU CH-E7KE-RQCQ0

Connects RAID controllers to SAS hard drives with integrated SATA power in a single shielded cable

  • Integrated data and power reduces cable clutter
  • Shielded construction limits EMI for stable 24/7 operation
  • Locking latches prevent accidental disconnection from vibration
  • Connects SFF-8643 RAID controllers to SFF-8482 SAS drives
  • 1 metre length fits rack and workstation chassis

Server Storage Cable

This one-metre Mini SAS HD breakout cable carries an SFF-8643 connector on one end and an SFF-8482 29-pin connector with integrated SATA power on the other. It links a RAID controller directly to 2.5" or 3.5" SAS hard drives inside servers, NAS units and storage arrays. The design merges data and power paths into a single run, reducing internal clutter.

System Builders and Integrators

The cable suits administrators wiring SFF-8643 RAID controllers to SFF-8482 SAS HDDs who want simpler cable management and vibration-resistant locking latches. It is not for installers whose drives lack the 29-pin SFF-8482 interface or whose controller ports use a different mini-SAS form factor. Buyers needing to connect SATA-only drives without a SAS controller should look elsewhere.

Shielded Signal Integrity

Multi-layer shielding suppresses electromagnetic interference from power supplies, motherboards and cooling fans to maintain stable transmission during continuous 24/7 operation. Precision-moulded connectors with reinforced locking clips keep pins firmly seated despite chassis vibration. The combined data-and-power construction saves space in dense enclosures.

Highlights

  • Integrated data and power reduces cable clutter
  • Shielded construction limits EMI for stable 24/7 operation
  • Locking latches prevent accidental disconnection from vibration
  • Connects SFF-8643 RAID controllers to SFF-8482 SAS drives
  • 1 metre length fits rack and workstation chassis

Specifications

No published specifications for this item yet.

Questions about this item

What controller port do I need on my RAID card for the SFF-8643 end of this cable?

Your RAID controller must provide an SFF-8643 Mini SAS HD port to accept the input connector on this cable.

Will the SFF-8482 29Pin connectors fit the 2.5 and 3.5 SAS drives I already have installed?

Yes, the breakout ends are SFF-8482 29Pin, the standard interface for both 2.5 and 3.5 SAS hard drives.

How can I verify the integrated SATA power is delivering voltage to each drive after I connect the cable?

Check that each drive spins up and appears in the RAID BIOS or operating system; the integrated SATA power connector supplies the drive directly through the same cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.