SMUGDESK
SMUGDESK 17-Port 6-Pin Breakout Board Adapter for DPS800GB 1200FB 1200QB PSU
Converts DPS800GB, 1200FB and 1200QB server PSUs into a 17-port ATX 6-pin hub for multi-GPU mining rigs and workstations
- Supports 17 ATX 6-pin connectors for multi-GPU rigs
- Compatible with DPS800GB, 1200FB, 1200QB server PSUs
- Reinforced PCB handles continuous 1200W high-load operation
- Plug-and-play design converts server PSU to GPU power source
- Heavy-duty components ensure stable power for mining farms
17-Port 6-Pin Breakout Board
This breakout board adapter converts compatible server power supplies into a multi-GPU power hub. It provides 17 ATX 6-pin connectors from a single high-wattage unit. The board is designed for DPS800GB, 1200FB and 1200QB server PSUs. It enables cost-effective power distribution for dense GPU configurations.
Mining Rigs and Multi-GPU Workstations
Builders assembling cryptocurrency mining rigs or multi-GPU workstations will find this adapter practical. It repurposes enterprise-grade server units for sustained high-load operation. Users needing native 8-pin or 12VHPWR connectors must source different breakout boards or cables. Systems requiring fewer than 17 ports may prefer a smaller adapter.
17 ATX 6-Pin Output Ports
The defining specification is the 17 ATX 6-pin output ports. This port count dictates how many graphics cards can be powered simultaneously from one board. Verify your GPUs use 6-pin power inputs before purchasing. The adapter supports up to 1200W total throughput from the host supply.
Highlights
- Supports 17 ATX 6-pin connectors for multi-GPU rigs
- Compatible with DPS800GB, 1200FB, 1200QB server PSUs
- Reinforced PCB handles continuous 1200W high-load operation
- Plug-and-play design converts server PSU to GPU power source
- Heavy-duty components ensure stable power for mining farms
Specifications
No published specifications for this item yet.
Questions about this item
Which server PSU models must I already own to use this 17-port breakout board?
The adapter is designed for DPS800GB, 1200FB and 1200QB server power supplies rated at 1200W.
Will my existing ATX 6-pin GPU cables plug straight into the 17 ports on this board?
Yes, each of the 17 ports is a standard ATX 6-pin output so current GPU cables connect without adapters.
How can I confirm the board is delivering power to all 17 ports after installation?
Power on the server PSU; GPUs attached to every port should initialise and show stable operation under load.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



