We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10ft Cat6A shielded ethernet cable with snagless RJ45 connectors

SMUGDESK

SMUGDESK 10ft Cat6A Shielded Snagless Ethernet Cable Black

SKU CH-G786-K7GFW

A 10 ft shielded Cat6A patch cable rated for 10 Gbps with snagless boots and RJ45 connectors

  • 10 Gbps high-speed transmission for heavy data tasks
  • Fully shielded design blocks EMI for stable throughput
  • Snagless boot protects RJ45 latch from breakage
  • Flexible black PVC jacket suits rack and desk routing
  • Universal RJ45 fits routers, PCs, NAS and consoles

10ft Cat6A shielded cable

This ten‑foot black Cat6A shielded Ethernet patch cable is built for anyone who needs a reliable 10Gbps wired link between a router, modem, PC, NAS, server or gaming console. The fully shielded construction blocks electromagnetic interference from nearby power cords and equipment, keeping packet loss low during heavy data transfers. A snagless boot protects the RJ45 latch from breaking when the cable is plugged, unplugged or routed through tight spaces. The flexible PVC jacket resists abrasion and suits home, office or rack‑cabinet installations.

Upgrade from Cat5e or unshielded Cat6

Replacing an older Cat5e or unshielded Cat6 cable with this shielded Cat6A version is worthwhile when your network hardware supports the higher standard and you want the full 10Gbps bandwidth for large file moves, backups or low‑latency gaming. The shielding adds stability in electrically noisy environments such as server racks or crowded desk setups. If your current cabling already meets the required category and shielding, the performance gain will be minimal.

Check port speed and shielding needs

Before ordering, verify that your router, switch, NAS or PC ports are rated for Cat6A or 10Gbps operation; otherwise the cable will negotiate a lower speed. Confirm that the RJ45 jack on each device accepts a standard connector with a snagless boot, as some ultra‑compact ports can be tight. Ensure the ten‑foot length fits your routing path without excess slack or tension. No driver installation is required for plug‑and‑play use.

Highlights

  • 10 Gbps high-speed transmission for heavy data tasks
  • Fully shielded design blocks EMI for stable throughput
  • Snagless boot protects RJ45 latch from breakage
  • Flexible black PVC jacket suits rack and desk routing
  • Universal RJ45 fits routers, PCs, NAS and consoles

Specifications

No published specifications for this item yet.

Questions about this item

What physical clearance does the 10ft Cat6A cable need for the snagless boot around the RJ45 connector?

The snagless boot adds a small overhang beyond the RJ45 body, so allow a few millimetres of extra depth behind the port when routing the cable in tight rack or cabinet spaces.

How do I install the cable without damaging the latch, and what is the common mistake?

Align the RJ45 tab with the port slot, push straight in until the latch clicks, and never force the cable sideways — angled insertion is the step that snaps the plastic latch despite the snagless boot.

When should I replace this Cat6A patch cable to keep 10Gbps performance?

Replace it if the outer jacket shows cuts or kinks, the shield foil is exposed, the RJ45 latch no longer clicks securely, or you measure rising packet loss on a certified 10Gbps link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.