We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black Ethernet splitter box with short attached cable and two RJ45 ports

SMUGDESK

SMUGDESK 1 to 2 Ethernet Splitter 4.9FT Cat6 Cable 1000Mbps

SKU CH-JD1B-V9SAE

Splits one Ethernet input into two simultaneous connections using a 4.9FT Cat6 cable at 1000Mbps

  • Connect two devices from one Ethernet port
  • Stable 1000Mbps gigabit speed for streaming and gaming
  • 9FT built-in Cat6 cable works with Cat5/5e/6/7/8
  • Plug-and-play with routers, switches, modems and PCs
  • Compact design expands home or office networks easily

1-to-2 Ethernet Splitter with Cat6 Cable

The SMUGDESK splitter turns a single RJ45 port into two active connections using an integrated 4.9FT Cat6 cable. It is built for households or small offices that need to add a smart TV, console or second PC without running new wiring. No drivers or configuration are required.

Replaces Long Cable Runs or Extra Switches

Instead of pulling a second line through walls or adding a powered switch, this splitter shares the existing 1000Mbps link between two devices. The jump makes sense when the router has spare ports but physical cabling is impractical or when a temporary setup needs quick expansion.

Sustained Dual-Device Throughput

Under continuous load both ports share the 1000Mbps bandwidth, so heavy simultaneous transfers will divide the available speed. The Cat6 construction maintains signal integrity over the full length, keeping latency stable during extended streaming or large file copies.

Highlights

  • Connect two devices from one Ethernet port
  • Stable 1000Mbps gigabit speed for streaming and gaming
  • 9FT built-in Cat6 cable works with Cat5/5e/6/7/8
  • Plug-and-play with routers, switches, modems and PCs
  • Compact design expands home or office networks easily

Specifications

No published specifications for this item yet.

Questions about this item

What length is the attached Cat6 cable on this splitter?

The splitter has a 4.9FT Cat6 cable permanently attached for plug-and-play use.

How is the splitter powered during installation?

It requires no external power; simply connect the single RJ45 input to your router or switch and the two outputs to your devices.

Will the RJ45 connectors need replacement after extended use?

The gold-plated RJ45 contacts are rated for repeated insertions and the moulded strain relief protects the cable ends from wear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.