We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with a narrow 1.8 inch ZIF socket on one side and a 26 pin mSATA edge connector on the other

SMUGDESK

SMUGDESK 1.8" ZIF/LIF CE to 26Pin mSATA Adapter

SKU CH-JM0G-JZJ1Y

Converts 1.8" ZIF/LIF CE drives to a 26-pin mSATA interface for laptop, industrial and retro upgrades

  • Converts 1.8" ZIF/LIF CE drives to 26-pin mSATA interface
  • Reuses legacy ultrathin HDDs and SSDs in modern mSATA systems
  • Compact PCB delivers stable signal transmission with plug-and-play operation
  • No additional drivers required for installation
  • Low-profile form factor fits vintage and industrial storage devices

1.8" ZIF/LIF CE to 26Pin mSATA Adapter

This adapter connects 1.8inch ZIF/LIF CE hard drives and SSDs to a standard 26pin mSATA slot. It is built for technicians and hobbyists who need to reuse legacy ultrathin storage in newer systems. The board requires no drivers and works immediately after installation. It suits notebook upgrades, industrial equipment repair and retro computing projects.

Build integration

The compact PCB plugs directly into an mSATA socket and accepts the ZIF/LIF CE drive on the opposite side. No extra cables or power connections are needed beyond what the host slot provides. This frees the builder from sourcing rare ZIF-compatible host hardware. The low-profile design fits tight chassis spaces common in industrial PCs and vintage laptops.

What the bundle changes

The package contains only the adapter board itself. No mounting screws, ribbon cables or software utilities are included. Users must supply any required fasteners or drive caddies separately. The bare-board approach keeps cost low for workshops that already stock installation hardware.

Highlights

  • Converts 1.8" ZIF/LIF CE drives to 26-pin mSATA interface
  • Reuses legacy ultrathin HDDs and SSDs in modern mSATA systems
  • Compact PCB delivers stable signal transmission with plug-and-play operation
  • No additional drivers required for installation
  • Low-profile form factor fits vintage and industrial storage devices

Specifications

No published specifications for this item yet.

Questions about this item

What limits the sustained throughput of the 1.8" ZIF/LIF CE to 26Pin mSATA Adapter?

The adapter is a passive PCB that simply routes the ZIF/LIF CE signals to the 26pin mSATA connector, so the sustained speed is capped by the drive you attach and the host controller, not by the adapter itself.

How much heat or noise does the adapter generate when running continuously?

It has no active components, so it produces no audible noise and negligible heat; any temperature rise comes from the connected drive and the host system.

What host hardware must already be present for this adapter to function?

You need a system with a free 26pin mSATA slot and a 1.8inch ZIF/LIF CE drive to plug into the adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.