We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short 0.5m SFF-8643 to four SFF-8482 SAS cables with SATA power connectors

SMUGDESK

SMUGDESK 0.5m SFF-8643 to 4x SFF-8482 SAS Cable with SATA Power, Pack of 2

SKU CH-0KXZ-89Q40

Connects one SFF-8643 port to four SFF-8482 SAS drives with integrated SATA power, 0.5m length for tidy server cabling, pack of 2

  • Tidy 0.5 m length keeps server cabinet wiring organised
  • SFF-8643 to four SFF-8482 ports connects multiple drives at once
  • Integrated SATA power adapter delivers stable power to SAS disks
  • Shielded construction reduces interference for reliable data transmission
  • Pack of two cables supports redundancy or multi-device deployment

Server Storage Connectivity

This pack contains two Mini SAS cables, each 0.5 metres (1.6 feet) long, built to link an SFF-8643 port on a RAID card or motherboard to four SFF-8482 SAS hard drives. An integrated SATA power connector feeds each drive directly, removing the need for separate power splitters. The short length keeps chassis wiring neat and aids airflow in dense server builds.

Sustained Data Integrity

Heavy shielding along the cable core suppresses electromagnetic interference during continuous read and write cycles, lowering the chance of drive drop-outs or silent data corruption over long operating periods. The fixed four-drive breakout maintains consistent signal paths without the variability that removable adapters can introduce. Plug-and-play operation means no driver stack to degrade under load.

Pre-Installation Checklist

Verify that your controller or backplane presents an SFF-8643 Mini SAS interface and that the target drives use SFF-8482 connectors. Confirm the chassis has enough clearance for the 0.5 metre reach between the controller port and the drive bays. Ensure a free SATA power header exists on your power supply for each cable's power adapter. Buyers needing longer runs or different drive connector types should select an alternative cable.

Highlights

  • Tidy 0.5 m length keeps server cabinet wiring organised
  • SFF-8643 to four SFF-8482 ports connects multiple drives at once
  • Integrated SATA power adapter delivers stable power to SAS disks
  • Shielded construction reduces interference for reliable data transmission
  • Pack of two cables supports redundancy or multi-device deployment

Specifications

No published specifications for this item yet.

Questions about this item

Will the 0.5m cable length and shielding prevent heat or signal issues during all-day server operation?

The 0.5m length avoids excess wiring that blocks airflow inside the chassis, and the shielded core resists electromagnetic interference for reliable data transmission during continuous use.

What existing hardware must I have to use the SFF-8643 to 4x SFF-8482 connectors with the SATA power adapter?

You need a host with an SFF-8643 Mini SAS port, up to four SAS drives with SFF-8482 connectors, and a free SATA power connector from your power supply.

Can I connect these cables to older 2.5-inch or 3.5-inch SAS drives that use the SFF-8482 interface?

Yes, the four SFF-8482 connectors are designed for mainstream 2.5-inch and 3.5-inch SAS hard drives, allowing direct attachment without adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.