We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
0.5M Mini SAS SFF8087 to four 90° angled SATA breakout cable

SMUGDESK

SMUGDESK 0.5M Mini SAS SFF8087 to 4×90° Angled SATA Breakout Cable

SKU CH-FTXE-CZ72Q

Converts one Mini SAS SFF8087 port into four 90° angled SATA connectors with 30AWG low-loss wire for 12Gbps internal server storage links

  • Splits one SFF8087 port into four SATA drives
  • 12Gbps bandwidth handles HDD, SSD and RAID arrays
  • 30AWG lowloss wire keeps signals stable over time
  • 90° angled plugs save chassis space and ease routing
  • .5M length fits tight server, NAS and PC cases

Breakout cable for multidrive servers

This internal breakout cable splits a single Mini SAS SFF8087 port into four 90° angled SATA connectors, enabling compact multidrive connections inside servers, NAS units and workstations. It is built for administrators who need dense, reliable storage wiring without excess cable bulk.

Practical limits of the SAS interface

The cable supports 12Gbps bandwidth across each lane, matching the throughput ceiling of the SAS 3.0 electrical specification used by modern backplanes. Performance will scale down to the speed of the slowest attached drive or controller, so 6Gbps SATA devices will operate at their native rate rather than the cable maximum.

Critical spec: 30AWG lowloss wire

Premium 30AWG conductors reduce signal attenuation over the .5M run, preserving eye-diagram integrity at 12Gbps where thinner or longer cables would introduce errors. If the chassis demands a longer reach or a different exit angle, this specific wire gauge and fixed length will not suit the build.

Highlights

  • Splits one SFF8087 port into four SATA drives
  • 12Gbps bandwidth handles HDD, SSD and RAID arrays
  • 30AWG lowloss wire keeps signals stable over time
  • 90° angled plugs save chassis space and ease routing
  • .5M length fits tight server, NAS and PC cases

Specifications

No published specifications for this item yet.

Questions about this item

Is the 0.5M length right for my server chassis?

The 0.5M length suits short internal runs in compact servers, NAS units and PC cases where drives sit close to the controller.

Will the 12Gbps rating give me full SSD speed?

The cable supports 12Gbps bandwidth so each SATA drive can run at its native 6Gbps limit without the cable becoming a bottleneck.

Does the SFF8087 end work with standard SAS backplanes?

Yes, the Mini SAS SFF8087 connector mates with standard SAS controller ports and backplanes that use the same interface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.