We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
0.5m black Mini SAS SFF8087 straight to right-angle cable

SMUGDESK

SMUGDESK 0.5m Mini SAS SFF8087 Straight to RightAngle 12Gbps 30AWG Black Flat Connector

SKU CH-TXYV-E0YAD

Connects SAS devices with a straight-to-right-angle SFF-8087 link at 12 Gbps over 0.5 m of 30 AWG copper for tight server chassis

  • Straight-to-right-angle SFF8087 design simplifies tight server routing
  • 12Gbps SAS bandwidth keeps RAID arrays running at full speed
  • 30AWG pure copper core cuts signal loss for stable transfers
  • Flat low-profile connector clears airflow paths in compact chassis
  • .5m length fits close-proximity backplane links without slack

Direct Right-Angle SFF8087 Routing

This SMUGDESK cable provides a straight-to-right-angle SFF8087 connection for internal server and storage wiring. The .5m length suits close-proximity links between RAID controllers and drive backplanes. It targets system builders who need flexible, space-optimized routing inside compact chassis.

12Gbps Signal Integrity

Built with 30AWG pure copper conductors, the cable supports stable 12Gbps SAS bandwidth with minimal attenuation. The low-loss design maintains consistent data transfer for enterprise HDD and SSD arrays. Flat black connectors sit flush to improve airflow and reduce thermal interference in dense enclosures.

Compact Chassis Integration

The right-angle end enables tidy runs along backplanes or sidewalls where a straight plug would block adjacent slots. Flat connectors simplify cable management in small-form-factor servers and NAS units. This cable frees up internal volume for additional drives or cooling components.

Highlights

  • Straight-to-right-angle SFF8087 design simplifies tight server routing
  • 12Gbps SAS bandwidth keeps RAID arrays running at full speed
  • 30AWG pure copper core cuts signal loss for stable transfers
  • Flat low-profile connector clears airflow paths in compact chassis
  • .5m length fits close-proximity backplane links without slack

Specifications

No published specifications for this item yet.

Questions about this item

How do I route the straight-to-right-angle SFF8087 connectors inside a tight server chassis?

Align the straight end with the controller port, then fold the right-angle end toward the backplane; the flat low-profile connector clears adjacent cards and keeps airflow paths open.

What upkeep does the 30AWG copper cable need over time?

No scheduled maintenance is required; reseat both SFF8087 ends only if link errors appear after chassis vibration or thermal cycling.

At what point does the 12Gbps signal degrade on a 0.5m run?

The short 0.5m length keeps attenuation well within the 12Gbps spec, so the first limit under sustained load is typically the controller or drive firmware, not the cable itself

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.