We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
.5M Mini SAS SFF8087 left-angle to four straight SATA female breakout cable

SMUGDESK

SMUGDESK 0.5M Mini SAS SFF8087 LeftAngle to 4×Straight SATA Female 30AWG 10Ohm

SKU CH-GHX7-S4BPW

Connects one Mini SAS SFF8087 port to four straight SATA drives using a left-angle plug, .5 m of 30 AWG copper wire and 10 ohm impedance for reliable server and RAID wiring

  • Left-angled SFF-8087 fits tight server chassis for clean multidrive routing
  • 30AWG pure copper with 10ohm impedance ensures stable high-speed SAS/SATA signals
  • Four straight SATA female outputs connect multiple drives to one RAID controller port
  • 5M compact length keeps internal wiring tidy in small-form-factor enclosures
  • Shielded server-grade construction reduces EMI for reliable continuous data-center operation

Compact breakout cable for multidrive servers

This .5M Mini SAS SFF8087 left-angle to four straight SATA female cable connects a single controller port to multiple drives inside tight chassis spaces. It targets system builders and storage administrators who need space-efficient internal wiring for RAID arrays, backplanes or NAS enclosures.

Left-angle SFF8087 connector clears cramped drive

The angled plug reduces strain and fits where straight connectors cannot, while 30AWG pure copper conductors and strict 10ohm impedance control maintain stable highspeed SAS and SATA signal integrity across all four lanes.

Shields against EMI for continuous datacentre duty

Server-grade shielding suppresses electromagnetic interference during long-term operation, freeing airflow in small-form-factor builds and eliminating the clutter of separate cables when routing from one controller to four drives.

Highlights

  • Left-angled SFF-8087 fits tight server chassis for clean multidrive routing
  • 30AWG pure copper with 10ohm impedance ensures stable high-speed SAS/SATA signals
  • Four straight SATA female outputs connect multiple drives to one RAID controller port
  • 5M compact length keeps internal wiring tidy in small-form-factor enclosures
  • Shielded server-grade construction reduces EMI for reliable continuous data-center operation

Specifications

No published specifications for this item yet.

Questions about this item

How does the 0.5 m length affect cable routing inside a compact server?

The half-metre run keeps the breakout tight to the backplane, letting you route four SATA drives without excess slack that blocks airflow in small-form-factor chassis.

What does the 10 ohm impedance rating mean for the SAS link?

It guarantees controlled-impedance signalling across the SFF-8087 to SATA breakout, reducing reflections so the SAS controller maintains full link speed to each drive.

Will the left-angle SFF-8087 connector clear a low-profile RAID card bracket?

Yes, the left-angle hood sits flush against the card edge, so the cable bends parallel to the PCB and fits behind brackets that would block a straight connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.