Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.0008192BTC
In stock
SKF
SKF 99242 Shaft Sleeve 2.435 in. to 2.441 in
Stainless steel wear sleeve for 61.85–62 mm shafts, chromium plated for heavy industrial use
- ColorTransparent
- Precise fit for shafts 2.435 in. to 2.441 in.
- Stainless steel with chromium plating resists heavy industrial wear
- Thin 0.28 mm wall adds minimal radial bulk
- Operates up to 225 °F in demanding applications
- 88 mm overall width covers 12.7 mm shaft contact area
SKF 99242 Shaft Sleeve for 61.85–62 mm shafts
This SKF 99242 wear sleeve fits shaft diameters from 61.85 mm to 62 mm. It is designed for heavy industrial applications where a damaged shaft surface needs repair. The chromium-plated stainless steel construction provides a durable running surface for seals.
Sustained load performance up to 225 °F
The sleeve withstands continuous operating temperatures up to 225 degrees Fahrenheit. Its 0.28 mm wall thickness and 12.7 mm width on shaft maintain dimensional stability under prolonged thermal and mechanical stress. The chromium-plated finish resists wear during extended service intervals.
Simple press-fit installation with tight tolerances
Installation requires pressing the sleeve onto the shaft within the 61.85 mm to 62 mm diameter range. The outside diameter tolerance of ±1.6 mm and width tolerance of ±0.8 mm demand precise shaft preparation. Incorrect shaft sizing or misalignment during fitting are the most common causes of premature failure.
Highlights
- Precise fit for shafts 2.435 in. to 2.441 in.
- Stainless steel with chromium plating resists heavy industrial wear
- Thin 0.28 mm wall adds minimal radial bulk
- Operates up to 225 °F in demanding applications
- 88 mm overall width covers 12.7 mm shaft contact area
Specifications
| Brand | SKF |
|---|---|
| Color | Transparent |
Questions about this item
How much heat can the SKF 99242 shaft sleeve withstand during continuous operation?
The sleeve is rated for a maximum temperature of 225 Degrees F, making it suitable for sustained high-heat industrial environments.
What shaft diameter range must the existing shaft fall within for the 99242 sleeve to fit correctly?
The sleeve fits shafts between 61.85 mm and 62 mm, corresponding to 2.435 in. to 2.441 in.
Will the 15.88 mm overall width of this sleeve align with the seal seating on my current equipment?
The sleeve provides 12.7 mm width on the shaft with a total width of 15.88 mm; verify your seal contact area matches these dimensions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
