Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081619BTC
In stock
SKF
SKF 99225 Wear Sleeve 57.12-57.28 mm Shaft Range
Repairs worn shafts from 57.12 to 57.28 mm with a chromium-plated stainless steel sleeve 23.83 mm wide
- ColorTransparent
- Precise fit for shafts 57.12–57.28 mm
- Stainless steel construction resists heavy industrial wear
- Chromium plated finish protects against corrosion
- Thin 0.28 mm wall saves radial space
- Withstands temperatures up to 225 °F
Target Application
The SKF 99225 wear sleeve fits shafts between 57.12 mm and 57.28 mm diameter. It restores the sealing surface on heavy industrial equipment without machining the shaft. The chromium plated stainless steel construction resists corrosion at temperatures up to 225 degrees F. Buyers needing a different shaft range or a non metallic sleeve cannot use this part.
Sustained Performance
The sleeve maintains its dimensions with an outside diameter tolerance of plus or minus 1.6 mm and a width tolerance of plus or minus 0.8 mm. Wall thickness of 0.28 mm provides a thin durable barrier between the shaft and the seal lip. The chromium plated finish reduces wear during continuous rotation in harsh environments. The material withstands the specified maximum temperature without degrading.
Installation Notes
The sleeve slides over the shaft and seats against a flange diameter of 64.29 mm. Overall width is 23.83 mm with 19.84 mm effective width on shaft. Installers must verify shaft diameter falls within the 57.12 mm to 57.28 mm range before fitting. Incorrect shaft size or damaged flange contact surface are the most common causes of seal failure after installation.
Highlights
- Precise fit for shafts 57.12–57.28 mm
- Stainless steel construction resists heavy industrial wear
- Chromium plated finish protects against corrosion
- Thin 0.28 mm wall saves radial space
- Withstands temperatures up to 225 °F
Specifications
| Brand | SKF |
|---|---|
| Color | Transparent |
Questions about this item
How hot can the 99225 wear sleeve get before it fails?
The sleeve is rated for a maximum temperature of 225 degrees F, so continuous operation above that limit risks material degradation.
What shaft diameter must I already have for this sleeve to fit?
Your shaft must measure between 57.12 mm and 57.28 mm; the sleeve is manufactured for that exact range.
Will the 64.29 mm flange clear the housing on my older pump?
The flange outer diameter is 64.29 mm with a tolerance of ±1.6 mm, so verify your housing bore provides at least that much clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
