Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.0008192BTC
In stock
SKF
SKF 99175 Wear Sleeve 44.37-44.53 mm Shaft Range
Stainless steel wear sleeve fits 44.37–44.53 mm shafts, 52.4 mm flange, 22.23 mm wide, 0.28 mm wall, rated to 225 °F
- ColorTransparent
- Protects shaft surfaces with stainless steel wear sleeve
- Fits 44.37 to 44.53 mm shaft diameters precisely
- Withstands 225 °F operating temperature reliably
- 4 mm flange diameter ensures secure mounting
- 28 mm wall thickness adds minimal bulk
Shaft Repair Sleeve for 44.37-44.53 mm Journals
This SKF wear sleeve fits shafts measuring 44.37 to 44.53 mm in diameter. The chromium-plated stainless steel sleeve has an overall width of 22.23 mm and a flange diameter of 52.4 mm. It is designed for heavy industrial applications where a damaged sealing surface must be restored quickly.
Suitable for metric shafts within the stated
Mechanics repairing worn seal journals on industrial equipment will find this sleeve matches the required dimensions. It operates at temperatures up to 225 degrees F. Shafts outside the 44.37 to 44.53 mm range, or applications needing a different width on shaft than 19.05 mm, require a different part number.
Critical specification is the shaft diameter range
The sleeve only fits shafts between 44.37 mm and 44.53 mm. Verify the journal diameter before ordering. The outside diameter tolerance is +/- 1.6 mm and the width tolerance is +/- 0.8 mm. The wall thickness is 0.28 mm.
Highlights
- Protects shaft surfaces with stainless steel wear sleeve
- Fits 44.37 to 44.53 mm shaft diameters precisely
- Withstands 225 °F operating temperature reliably
- 4 mm flange diameter ensures secure mounting
- 28 mm wall thickness adds minimal bulk
Specifications
| Brand | SKF |
|---|---|
| Color | Transparent |
Questions about this item
What shaft diameter range does the 99175 wear sleeve cover?
It fits shafts from 44.37 mm to 44.53 mm, matching the stated minimum and maximum shaft diameters.
What are the flange diameter and overall width that determine fit?
The flange diameter is 52.4 mm and the overall width is 22.23 mm, with a width tolerance of .8 mm.
How is the sleeve installed and what step is often missed?
Press the stainless steel sleeve onto the cleaned shaft so the 19.05 mm width on shaft seats fully; the step often missed is verifying the shaft surface is free of burrs before pressing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
