Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081705BTC
In stock
SKF
SKF 99161 Shaft Sleeve 1.622-1.628 in interior care
Stainless-steel wear sleeve restores shafts from 41.2 to 41.35 mm with a chromium-plated finish rated to 225 degrees F
- ColorTransparent
- Precise shaft fit with 1.622 to 1.628 in diameter range
- Corrosion-resistant chromium-plated stainless steel construction
- Reliable sealing at temperatures up to 225 Degrees F
- Exact metric dimensions for 41.2 to 41.35 mm shafts
- SKF-engineered quality for heavy industrial applications
SKF 99161 Shaft Sleeve Sizing
The SKF 99161 is a chromium-plated stainless steel wear sleeve designed for shafts measuring 41.2 to 41.35 mm. It provides a durable sealing surface for heavy industrial applications operating up to 225 degrees F. The sleeve features an overall width of 11.13 mm with a 7.95 mm width on the shaft.
Verify Shaft Diameter Before Ordering
Confirm your shaft diameter falls strictly within the 41.2 mm minimum and 41.35 mm maximum range. The outside diameter tolerance is +/- 1.6 mm and width tolerance is +/- 0.8 mm, so ensure your housing accommodates the 47.63 mm flange diameter. Wall thickness is 0.28 mm.
Chromium Plated Finish Extends Service Life
The chromium plating adds hardness and corrosion resistance to the stainless steel substrate. This finish reduces friction against sealing lips and protects the underlying shaft from abrasive contaminants in heavy industrial environments. The transparent colour allows visual inspection of the shaft surface underneath.
Highlights
- Precise shaft fit with 1.622 to 1.628 in diameter range
- Corrosion-resistant chromium-plated stainless steel construction
- Reliable sealing at temperatures up to 225 Degrees F
- Exact metric dimensions for 41.2 to 41.35 mm shafts
- SKF-engineered quality for heavy industrial applications
Specifications
| Brand | SKF |
|---|---|
| Color | Transparent |
Questions about this item
Does the SKF 99161 sleeve ship alone or with any installation hardware?
The sleeve is supplied as a single chromium-plated stainless-steel wear sleeve; no bolts, seals or tools are included in the box.
How do I decide between the 1.622 in and 1.628 in shaft-diameter limits?
Measure the shaft — if it falls between 41.2 mm and 41.35 mm (1.622 in to 1.628 in) the sleeve fits; choose based on your actual shaft size.
What does the 225 °F temperature rating mean for daily operation?
The sleeve is rated for continuous service up to 225 °F, so it will retain its press fit and chromium finish in heavy-industrial heat cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
