We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SKF 99153 stainless steel wear sleeve chromium plated finish 39.85 to 40.01 mm shaft range

SKF

SKF 99153 Wear Sleeve 39.85-40.01 mm Shaft Range

SKU CH-JFJ7-51MR4

Stainless steel wear sleeve fits shafts from 39.85 to 40.01 mm, chromium plated for heavy industrial use up to 225 °F

  • ColorTransparent
  • Restores shaft surface for reliable sealing
  • Fits 39.85 to 40.01 mm shaft diameters
  • Stainless steel with chromium plating resists corrosion
  • Withstands temperatures up to 225 °F
  • Thin 0.28 mm wall minimises space needed

Shaft Repair Sleeve 39.85–40.01 mm

The SKF 99153 wear sleeve fits shafts measuring 39.85 to 40.01 mm and restores the sealing surface without machining. It is made from stainless steel with a chromium-plated finish for corrosion resistance in heavy industrial applications.

Suits Maintenance Teams Rebuilding Sealed Shafts

Technicians who need to return a worn shaft to service quickly will appreciate the thin 0.28 mm wall and 9.91 mm contact width. Shops that require a press-fit sleeve for a different diameter range or a non-metallic surface should look at other options.

Simple Press-On Installation With Tight Tolerances

The sleeve slides over the shaft and seats against a 46.99 mm flange, held by interference fit within a ±1.6 mm outside-diameter tolerance. Misalignment during press-on or an out-of-round shaft can prevent full seating and cause premature seal wear.

Highlights

  • Restores shaft surface for reliable sealing
  • Fits 39.85 to 40.01 mm shaft diameters
  • Stainless steel with chromium plating resists corrosion
  • Withstands temperatures up to 225 °F
  • Thin 0.28 mm wall minimises space needed

Specifications

BrandSKF
ColorTransparent

Questions about this item

What shaft diameter must I already have for the 99153 sleeve to fit?

Your shaft must measure between 39.85 mm and 40.01 mm for the SKF 99153 wear sleeve to fit correctly.

Will the 12.93 mm overall width of this sleeve clear the flange on my existing housing?

The sleeve has a 46.99 mm flange diameter and 12.93 mm overall width; compare those dimensions to your housing clearance before installation.

How do I confirm the sleeve is seated properly after pressing it on?

Verify the sleeve sits flush with the shaft shoulder, the 9.91 mm shaft contact width is fully engaged, and the chromium-plated finish shows no gaps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.