We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SKF 19762 rotary shaft seal, transparent nitrile rubber with carbon steel spring, 2 in inner diameter, 2.623 in outer diameter

SKF

SKF 19762 Rotary Shaft Seal 2 x 2.623 x .313 in

SKU CH-N6XF-2BN7V

Rotary shaft seal with 2 in inside diameter, 2.623 in outside diameter and .313 in width for oils, fuels and greases up to 3,000 RPM

  • ColorTransparent
  • SKF quality sealing for reliable engine performance
  • CRWA1 design with dual nitrile lips handles 10 psi pressure
  • Fits 2 in shafts at up to 3,000 RPM
  • Compatible with oils, fuels, greases and hot water
  • Carbon steel spring maintains consistent lip contact

SKF 19762 Rotary Shaft Seal

This SKF 19762 rotary shaft seal fits a 2 in shaft and a 2.623 in housing bore. The CRWA1 design uses nitrile rubber lips and a carbon steel spring to retain lubricants and exclude contaminants. It handles fluids such as mineral oils, gasoline, diesel, greases, hot water and light heating oil. Maximum rotational speed is 3,000 RPM with a surface speed limit of 7.9 mps.

Mechanics sealing 2 in shafts at low pressure

The seal suits automotive and industrial equipment where a 2 in shaft runs at up to 3,000 RPM and pressure stays at or below 10 psi. The nitrile material resists common petroleum fluids and animal or vegetable oils. Builders needing higher pressure capability, larger shaft diameters or different fluid compatibility should select an alternative seal design.

Acrylic coated case eases installation

The metal case carries an acrylic coating that helps prevent bore corrosion and allows smoother press fitting during assembly. Two sealing lips with a carbon steel garter spring maintain consistent contact pressure over the service interval. No additional installation tools or lubricants are supplied with the seal.

Highlights

  • SKF quality sealing for reliable engine performance
  • CRWA1 design with dual nitrile lips handles 10 psi pressure
  • Fits 2 in shafts at up to 3,000 RPM
  • Compatible with oils, fuels, greases and hot water
  • Carbon steel spring maintains consistent lip contact

Specifications

BrandSKF
ColorTransparent

Questions about this item

What shaft diameter and housing bore does the 19762 seal require?

The seal fits a 2 in shaft inside a 2.623 in bore with a .313 in width.

Will the nitrile lips handle 3,000 RPM on a worn shaft?

The seal is rated for 3,000 RPM and 7.9 m/s surface speed; a worn shaft may reduce sealing life.

How can I confirm the seal is seated correctly after installation?

Check that the acrylic-coated case sits flush in the bore and the spring stays visible behind both lips.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.