We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rubber shaft seal ring 1.75 by 2.25 inches .188 wide

SKF

SKF 17240 Shaft Seal HM14 NBR 1.75 2.25 .188 in

SKU CH-3Y2F-M3AFA

Rotary shaft seal with 1.75 in inside diameter, 2.25 in outside diameter and .188 in width for grease-lubricated agricultural machinery up to 10 psi and 3,162 RPM

  • ColorTransparent
  • Reliable sealing for grease-lubricated machinery with 1.75 in inside diameter
  • Durable nitrile rubber lip handles animal and vegetable oils diesel gasoline and greases
  • Compact 0.188 in overall width fits tight engine spaces
  • Single-lip HM14 design rated for 10 psi maximum pressure
  • Operates up to 3,162 RPM for high-speed rotary applications

SKF 17240 Rotary Shaft Seal

The SKF 17240 is a rotary shaft seal designed for grease-lubricated agricultural machinery. It features an HM14 design code with a single nitrile rubber lip suitable for animal and vegetable oils, diesel, gasoline, greases, hot water, light heating oil and mineral oils. The uncoated case measures 1.75 in inside diameter, 2.25 in outside diameter and .188 in overall width. Maximum rotational speed is 3,162 RPM at 10 psi pressure.

Verify shaft dimensions and fluid compatibility

Confirm the shaft outer diameter matches 1.75 in and the housing bore matches 2.25 in before ordering. The seal width of .188 in must fit the available gland depth in your equipment. Ensure the operating fluid is listed among the compatible media such as greases, mineral oils or diesel. Check that shaft speed does not exceed 3,162 RPM and pressure stays below 10 psi for reliable sealing performance.

Single-lip NBR design simplifies installation

The single nitrile rubber lip with no spring reduces assembly complexity compared to multi-lip or spring-loaded alternatives. Uncoated case material allows direct metal-to-metal fit in standard bores without additional surface preparation. HM14 design code indicates a specific profile optimised for the stated fluid range and speed limit. No extra tools or lubricants beyond the application grease are required for fitting.

Highlights

  • Reliable sealing for grease-lubricated machinery with 1.75 in inside diameter
  • Durable nitrile rubber lip handles animal and vegetable oils diesel gasoline and greases
  • Compact 0.188 in overall width fits tight engine spaces
  • Single-lip HM14 design rated for 10 psi maximum pressure
  • Operates up to 3,162 RPM for high-speed rotary applications

Specifications

BrandSKF
ColorTransparent

Questions about this item

What comes in the box and is anything else needed to install the SKF 17240 shaft seal?

The box contains the single HM14 rotary shaft seal. No extra components are required for a standard press-fit installation into a 2.25 in bore.

How do I choose the right version of the 17240 seal for my application?

The 17240 is a single-lip NBR seal sized 1.75 in ID by 2.25 in OD by .188 in width, rated to 10 psi and 3 162 RPM; match those dimensions and limits to your shaft and housing.

What does the 3 162 RPM rating mean once the seal is fitted on a running shaft?

It is the maximum continuous shaft speed the NBR lip can handle while sealing grease or listed fluids at up to 10 psi without overheating or excessive wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.