We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR2 FBDIMM modules with silver heatsinks and gold contacts

Simmtec, Inc

Simmtec, Inc 8GB (2x4GB) DDR2-667 FBDIMM server RAM

SKU CH-354S-CDR53

Eight-gigabyte dual-channel DDR2-667 kit with two 240-pin fully-buffered DIMMs, CL5 latency, ECC registered, 1.8 V operation

  • Capacity8GB (2 x 4GB)
  • 8GB dual-rank capacity for dense server workloads
  • 667 MHz DDR2 speed rated at PC2-5300
  • Fully buffered ECC registered for data integrity
  • 240-pin DIMM form factor fits compatible server boards

Server Memory Kit

This Simmtec 8GB kit contains two 4GB fully buffered DIMMs built for DDR2 server platforms. The modules run at 667 MHz with CL5 latency and operate at 1.8 volts. They are registered ECC memory intended for multi-socket systems that require error correction and signal buffering. This kit will not work in desktop or laptop computers.

240-pin FBDIMM Build

Each stick uses a 240-pin connector and a normal-height profile with 36 chips in a 2Rx4 dual-rank layout. The fully buffered design moves the memory controller onto the module itself, reducing electrical load on the motherboard. Installation requires a server board with DDR2 FBDIMM slots; standard DDR2 desktop slots are physically and electrically incompatible.

Highlights

  • 8GB dual-rank capacity for dense server workloads
  • 667 MHz DDR2 speed rated at PC2-5300
  • Fully buffered ECC registered for data integrity
  • 240-pin DIMM form factor fits compatible server boards

Specifications

Capacity8GB (2 x 4GB)

Questions about this item

What speed does the DDR2-667 FBDIMM interface actually run at in a server?

The modules operate at 667 MHz, which corresponds to the PC2-5300 data rate for fully buffered DIMM slots.

What physical space and slot type are required to install these 240-pin FBDIMMs?

Each stick uses a standard 240-pin DIMM form factor with normal height, so it fits any server board that accepts DDR2 fully buffered DIMMs.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.