We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Simmtec, Inc

Simmtec, Inc 64GB (4x16GB) DDR3 1066 PC3-8500 ECC RDIMM for PowerEdge R810

SKU CH-F5RQ-TD9TF

A 64 GB DDR3 kit of four 16 GB ECC registered modules running at 1066 MHz for the PowerEdge R810

  • Capacity64GB (4 x 16GB)
  • 64 GB total capacity from four matched 16 GB modules
  • DDR3 1066 MHz speed rated as PC3-8500 for server workloads
  • ECC registered design detects and corrects single-bit errors
  • Qualified for Dell PowerEdge R810 systems
  • Built with Micron, Samsung, Hynix or Elpida components meeting JEDEC standards

64 GB DDR3 ECC RDIMM kit

This 64 GB kit consists of four 16 GB DDR3 1066 registered DIMMs built for the Dell PowerEdge R810. It targets administrators upgrading or repairing that specific server platform with validated ECC memory.

Capacity and headroom

The 64 GB total provides substantial headroom for virtualisation workloads and large in-memory databases on the R810. The four-module layout fills four slots, so further expansion requires removing existing DIMMs.

Dell-qualified part number

Each module carries the SNPY898NC/16GB part number confirmed for the PowerEdge R810. That qualification reduces the risk of POST errors or unsupported-configuration alerts during deployment.

Highlights

  • 64 GB total capacity from four matched 16 GB modules
  • DDR3 1066 MHz speed rated as PC3-8500 for server workloads
  • ECC registered design detects and corrects single-bit errors
  • Qualified for Dell PowerEdge R810 systems
  • Built with Micron, Samsung, Hynix or Elpida components meeting JEDEC standards

Specifications

Capacity64GB (4 x 16GB)

Questions about this item

Will the four 16 GB modules install alongside existing DDR3 RDIMMs already in the PowerEdge R810?

Each stick is a 16 GB DDR3 1066 PC3-8500 ECC registered DIMM; the server will run all populated slots at the speed of the slowest module present.

How can I verify the kit is running at 1066 MHz with ECC active after installation?

Check the BIOS memory information or use a tool such as dmidecode to confirm each DIMM reports 1066 MT/s, PC3-8500 and ECC enabled.

Does the package contain only the four 16 GB RDIMMs or are any cables or brackets included?

The box holds four 16 GB DDR3 1066 PC3-8500 ECC registered DIMMs; no cables, brackets or additional hardware are supplied.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.