We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 DIMM with black chips, gold contacts, silver heat spreader

Simmtec, Inc

Simmtec, Inc 16GB DDR3-1600 ECC REG 1.35V 240-pin DIMM

SKU CH-4KA9-Z371N

16 GB DDR3 ECC registered module at 1.35 V, 1600 MHz with CL11 latency

  • Capacity16GB
  • Type240-Pin DDR3 SDRAM
  • 16 GB capacity for high-density server workloads
  • Registered ECC design improves data integrity
  • Low-voltage 1.35 V operation reduces power draw
  • DDR3-1600 speed delivers 12800 MT/s bandwidth
  • Micron 2Rx4 240-pin DIMM built for reliability

Simmtec 16GB DDR3-1600 ECC REG DIMM

This 16GB DDR3 module operates at 1600MHz with a low 1.35V voltage. It features registered signal processing and ECC data integrity for server stability. The 240-pin form factor fits compatible DDR3 slots. Micron chips provide the memory density.

Suits servers needing registered ECC DDR3 memory

This module fits systems requiring 2RX4 organisation and CL11 latency at the PC3-12800R standard. Builders using unbuffered desktop boards or platforms limited to 1.5V DDR3 should look elsewhere. It does not support non-ECC or consumer chipsets.

Registered ECC at 1.35V DDR3-1600

The registered buffer reduces electrical load on the memory controller. ECC corrects single-bit errors automatically. The 1.35V operation lowers power draw versus standard voltage DDR3. Verify your board accepts registered modules before purchase.

Highlights

  • 16 GB capacity for high-density server workloads
  • Registered ECC design improves data integrity
  • Low-voltage 1.35 V operation reduces power draw
  • DDR3-1600 speed delivers 12800 MT/s bandwidth
  • Micron 2Rx4 240-pin DIMM built for reliability

Specifications

Capacity16GB
Type240-Pin DDR3 SDRAM

Questions about this item

Will the 16GB DDR3-1600 ECC REG DIMM downclock to match slower DDR3 modules already installed in the server?

The module operates at 1600 MHz with CL11 latency; the system memory controller sets the final speed when mixed with slower DDR3 DIMMs.

How can I confirm the 2RX4 registered ECC module is recognised and error-correction is active after installation?

Check the BIOS memory info for 16 GB, 1600 MHz, registered mode and ECC enabled; run a memory diagnostic to verify error detection.

Does the 240-pin DIMM ship alone or with a heatsink, and is a low-voltage 1.35 V power supply required separately?

The box contains only the 16 GB DDR3-1600 REG ECC DIMM; no heatsink or extra power supply is included.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.