We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three green DDR3 DIMMs in anti-static bag

Simmtec, Inc

Simmtec, Inc 12GB 3x4GB DDR3-1600 PC3-12800 ECC REG server RAM

SKU CH-V8S8-FFTEW

12 GB DDR3-1600 ECC registered server memory kit with three 4 GB modules

  • Capacity12GB
  • 12 GB total capacity for server workloads
  • Triple-channel 3 x 4 GB kit for balanced bandwidth
  • DDR3-1600 PC3-12800 speed rating
  • ECC registered design protects data integrity
  • 25 years supplier experience in server components

Server-grade DDR3 capacity

This 12 GB kit delivers three 4 GB DDR3-1600 registered ECC modules for servers and workstations that require error-correcting memory. It is not compatible with standard desktop or laptop platforms that use unbuffered non-ECC memory.

Thermals and power profile

Registered ECC modules operate at the standard DDR3 voltage with typical power draw for PC3-12800 speeds. Passive cooling is sufficient in normal server chassis airflow and acoustic output remains negligible.

Build and connector implications

The 240-pin DIMM form factor fits server motherboards that support registered memory and the correct memory-channel configuration. Mixed-brand modules may vary in heatsink height so verify clearance in dense rackmount layouts.

Highlights

  • 12 GB total capacity for server workloads
  • Triple-channel 3 x 4 GB kit for balanced bandwidth
  • DDR3-1600 PC3-12800 speed rating
  • ECC registered design protects data integrity
  • 25 years supplier experience in server components

Specifications

Capacity12GB

Questions about this item

How do I install the three 4 GB DDR3 ECC REG modules in a server?

Power down the server, open the chassis, locate the DDR3 DIMM slots, align each module's notch with the slot key, press firmly until the retention clips lock, then close the chassis and power on.

What maintenance or replacement will the 12 GB DDR3 ECC REG kit need later?

DDR3 ECC registered modules have no moving parts; they typically run for years without service, and replacement is only needed if a module fails or capacity must be increased.

What limit appears first when the 12 GB DDR3-1600 kit runs under sustained load?

The DDR3-1600 rated speed and the memory controller's thermal envelope are the first constraints; sustained heavy workloads may throttle frequency before capacity becomes a bottleneck.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.