SIIG, Inc
SIIG, Inc JU-CB0D11-S1 USB 3.0 Active Repeater Cable 25M network antenna
Extends USB data transmission up to 25 metres at 5 Gbps with a built-in power adapter and over-current protection
- Extends USB data reach beyond standard limits using 25M active repeater design
- Delivers up to 5Gbps transfer rates with USB 3.0 SuperSpeed performance
- Daisy-chains through powered hub with included adapter for longer runs
- Built-in over-current protection safeguards devices from power surges
- Plug-and-play setup requires no driver installation for immediate use
USB 3.0 Active Repeater Cable 25M
This USB 3.0 active repeater cable extends data transmission up to 25 metres beyond the standard USB limit. It supports transfer rates up to 5 Gbps and includes a power adapter for power-hungry devices. The cable is fully shielded for error-free transmission and features built-in over-current protection. Plug-and-play operation requires no driver installation.
Replaces standard USB cable length limits
Standard passive USB cables cannot reliably carry signals past a few metres. This active repeater bridges that gap when devices such as cameras, storage or industrial sensors must sit far from the host. The jump is worth it when the installation distance exceeds the normal USB working boundary and a powered hub is available for daisy-chain configurations. Note that two cables cannot be daisy-chained directly together.
Simple plug-and-play installation
Connect the cable between the host and the peripheral, attach the supplied power adapter and the link is active immediately. No software drivers are needed on supported operating systems. The most common issue is attempting to chain two repeater cables without an intermediate powered hub, which the design does not support. Ensure each cable in a daisy chain receives its own power adapter for stable operation.
Highlights
- Extends USB data reach beyond standard limits using 25M active repeater design
- Delivers up to 5Gbps transfer rates with USB 3.0 SuperSpeed performance
- Daisy-chains through powered hub with included adapter for longer runs
- Built-in over-current protection safeguards devices from power surges
- Plug-and-play setup requires no driver installation for immediate use
Specifications
No published specifications for this item yet.
Questions about this item
Does the 25M cable need an external power adapter to work?
Yes, the included power adapter must be connected for the active repeater to function and to supply enough current for power-hungry USB devices.
How do you install the repeater cable and what step is often missed?
Connect the cable between host and device, then plug in the supplied power adapter; the step users skip is powering the adapter before linking the USB ends.
Will the active electronics in the 25M repeater cable degrade and need replacement?
The built-in over-current protection guards the repeater circuitry from power surges, so the cable itself does not have a scheduled replacement interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
