We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 1.2 MST splitter cable with two female ports and Micro-USB power

SIIG, Inc

SIIG, Inc CE-DP0H11-S1 1x2 DisplayPort 1.2 MST video splitter

SKU CH-KYAF-B1RE2 MPN CE-DP0H11-S1

A 1x2 DisplayPort 1.2 MST splitter drives two 3840 x 2160 monitors from one source at 21.6 Gbit/s with micro-USB power

  • ColorBlack
  • Splits one DisplayPort 1.2 signal into two monitors
  • 6 Gbit/s bandwidth supports 3840 x 2160 resolution
  • Micro-USB power port keeps both outputs stable
  • Plug-and-play setup works with desktops and notebooks
  • RoHS certified and TAA compliant for regulated environments

One-to-two DisplayPort 1.2 MST splitter

This cable splits a single DisplayPort 1.2 output into two independent DisplayPort signals using Multi-Stream Transport. It targets desktop or notebook users who need dual monitors from one graphics port. Plug-and-play operation requires no driver installation. The micro-USB connector draws auxiliary power for stable performance.

Fits between a GPU and two monitors

The male DisplayPort 1.2 plug connects to the source device while two female ports accept standard DisplayPort cables to each display. A micro-USB cable supplies extra current when the source port cannot deliver enough power. This arrangement frees the second GPU output for another task or leaves it unused on single-port laptops.

Passive cable runs cool and silent

With no active electronics beyond the MST hub, the unit produces no fan noise and adds negligible heat to the build. Power draw is limited to the micro-USB feed and the DisplayPort source capability. The 0.21 lb weight places minimal strain on the GPU bracket or laptop port during normal use.

Highlights

  • Splits one DisplayPort 1.2 signal into two monitors
  • 6 Gbit/s bandwidth supports 3840 x 2160 resolution
  • Micro-USB power port keeps both outputs stable
  • Plug-and-play setup works with desktops and notebooks
  • RoHS certified and TAA compliant for regulated environments

Specifications

BrandSIIG
ColorBlack
Shipping weight0.45 kg
Package size234 × 159 × 20 mm

Questions about this item

Does the 21.6 Gbit/s bandwidth limit 4K 60 Hz output on both displays?

The splitter supports 3840 x 2160 resolution at the full 21.6 Gbit/s DisplayPort 1.2 rate, so dual 4K 60 Hz is within spec.

Does the unit get hot or draw much power when driving two monitors all day?

It is powered through the included micro-USB cable and has no fan, so heat and noise stay minimal during continuous use.

Do I need a graphics card with DisplayPort 1.2 MST support to use this splitter?

Yes, the source must provide a DisplayPort 1.2 MST signal; the splitter then sends independent streams to each connected monitor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.