SIEMENS
SIEMENS 3RV20314JA10 Manual Motor Starter 54-65A
Manual motor starter protects three-phase motors at 54 to 65 amps with rotary-knob operation and self-protected combination controller design
- Handles motors up to 65 A with 54–65 A overload setting
- Controls three-phase loads at 690 V AC maximum
- Delivers 50 hp at 480 V three-phase
- Compact 5.51 × 2.17 × 5.87 in footprint
- Certified to ABS, ATEX, CCC, CE, CSA, UL standards
54-65 A Manual Motor Starter
The SIEMENS 3RV20314JA10 is a self-protected combination motor controller with a rotary operator. It provides overload protection adjustable from 54 to 65 A and three-pole switching up to 690 V AC. The unit carries ABS, ATEX, CCC, CE, CSA and UL certifications.
Suits 54-65 A motor circuits
This starter fits single-phase motors rated 5 hp at 120 V or 15 hp at 230 V and three-phase motors from 20 hp at 208 V up to 60 hp at 575 V. It is not intended for loads outside the 54-65 A range or for applications requiring an enclosed housing.
Panel-mount component
The open-type body measures 5.51 in high, 2.17 in wide and 5.87 in deep for direct panel mounting. It frees the builder from sourcing separate overload relays and contactors while requiring an external enclosure and upstream branch-circuit protection to complete the installation.
Highlights
- Handles motors up to 65 A with 54–65 A overload setting
- Controls three-phase loads at 690 V AC maximum
- Delivers 50 hp at 480 V three-phase
- Compact 5.51 × 2.17 × 5.87 in footprint
- Certified to ABS, ATEX, CCC, CE, CSA, UL standards
Specifications
| Brand | SIEMENS |
|---|
Questions about this item
What three-phase supply voltage do I need to run this starter at its 50 hp 480 V rating?
A 480 V AC three-phase supply is required to achieve the 50 hp rating listed for this starter.
Can I use this starter on a 208 V three-phase motor rated at 20 hp?
Yes, the starter is rated for 20 hp at 208 V three-phase, so it will protect that motor within its 54-65 A setting range.
After wiring, how do I verify the overload is set correctly for my motor?
Turn the rotary knob until the pointer aligns with the motor’s full-load current between 54 and 65 A, then confirm the motor starts and runs without nuisance tripping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
