SIEMENS
SIEMENS 3RT2046-1AK60 IEC Magnetic Contactor, 110-120V AC, 3P, 96A
Three-pole IEC magnetic contactor rated 96 A inductive with 110-120 V AC coil and 1NO/1NC auxiliary contacts
- IEC-rated switching for reliable motor control
- 110–120 V AC coil suits standard control voltages
- Three-pole design handles 96 A inductive loads
- 1 NO + 1 NC auxiliary contacts built in
- Compact 6.75 in height fits tight panels
IEC Magnetic Contactor for Motor Control
This SIEMENS 3RT2046-1AK60 contactor switches three-phase inductive loads up to 96 A and resistive loads up to 130 A. It operates on a 110-120 V AC coil and includes one normally-open and one normally-closed auxiliary contact. The unit suits industrial motor-starting and power-switching applications in the SIRIUS 3RT20 series.
DIN Rail Mounting with Screw Terminals
The contactor mounts on a DIN rail or directly on a surface and measures 6.75 in high by 3.15 in wide. Power and control connections use screw terminals for secure wiring. Installers must verify that the available panel space accommodates the stated height and width and that the control circuit supplies the correct 120 V AC coil voltage.
96 A Inductive Current Rating Decides Fit
The full-load inductive rating of 96 A is the decisive figure for selecting this contactor; applications exceeding this value require a larger frame. The device is non-reversing and carries no NEMA enclosure rating, so it must be installed inside a suitable cabinet. Buyers needing reversing operation or a built-in enclosure cannot use this model.
Highlights
- IEC-rated switching for reliable motor control
- 110–120 V AC coil suits standard control voltages
- Three-pole design handles 96 A inductive loads
- 1 NO + 1 NC auxiliary contacts built in
- Compact 6.75 in height fits tight panels
Specifications
| Brand | SIEMENS |
|---|
Questions about this item
How can I confirm the contactor is operating correctly after wiring the 120 V AC coil and load circuits?
Apply 110-120 V AC to the coil terminals; the three main poles should close cleanly and the 1NO/1NC auxiliary contacts should change state, which can be verified with a multimeter on the screw terminals.
What accessories are included and what must be sourced separately for a DIN-rail installation?
The contactor body with two integrated auxiliary contacts (1NO/1NC) and screw terminals is supplied; DIN rail, mounting screws, wiring, and any overload relay or surge suppressor are not included.
Which coil voltage variant matches a 120 V AC control circuit?
This 3RT2046-1AK60 version is rated for 110-120 V AC coil voltage; other coil voltages exist in the series but are different part numbers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
