We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SG Tool Aid 36250 fuel injection pressure tester kit in molded plastic case with gauge and adapters

SG Tool Aid

SG Tool Aid 36250 Multi-port Fuel Injection Pressure Tester

SKU CH-XVK9-DXAQW

Tests fuel pressure on domestic and foreign multi-port injection vehicles with included adapters, bleed valve, and 100 psi gauge in a molded storage case

  • Tests fuel pressure on most domestic and foreign multi-port injection vehicles
  • Bleed-off valve and hose de-pressurize the system safely after testing
  • Molded plastic storage case with handle keeps adapters organised and protected
  • 2-1/2" dual-scale gauge reads 100 psi and 7 bar with hang-up hook
  • Includes Schrader, Ford, Honda and 8 mm, 10 mm, 12 mm metric adapter sets

Product Identity

The SG Tool Aid 36250 is a multi-port fuel injection pressure tester designed for automotive technicians and serious DIY mechanics. It covers virtually all domestic and foreign vehicles equipped with multi-port fuel injection, plus throttle body injection on most Chrysler and Ford models. Diesel engines are not supported.

Thermals, Noise and Power

This is a mechanical diagnostic tool with no electrical power requirement, so it produces no heat, noise or power draw during use. A 2-1/2 inch diameter gauge with a dual scale reads up to 100 psi and 7 bar, and a bleed-off valve with hose allows safe depressurisation of the fuel system after testing.

Build Integration

The kit includes adapters for domestic, Asian and European vehicles with a standard Schrader test port, a Ford multi-port and throttle body adapter, a Honda adapter, and a four-piece metric adapter set with 8mm-1.00, 10mm-1.0, 12mm-1.25 and 12mm-1.50 threads. Assorted hoses, barb fittings and clamps cover older vehicles. Everything stores in a moulded plastic case measuring 11-1/4 x 7-1/2 x 3 inches with a carry handle and space for extra parts.

Highlights

  • Tests fuel pressure on most domestic and foreign multi-port injection vehicles
  • Bleed-off valve and hose de-pressurize the system safely after testing
  • Molded plastic storage case with handle keeps adapters organised and protected
  • 2-1/2" dual-scale gauge reads 100 psi and 7 bar with hang-up hook
  • Includes Schrader, Ford, Honda and 8 mm, 10 mm, 12 mm metric adapter sets

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 36250 tester to a Ford multi-port EFI system?

Use the dedicated Ford multi-port adapter supplied in the kit, attach it to the vehicle's test port, then connect the gauge hose; the bleed-off valve lets you de-pressurise safely after the test.

Which parts of the 36250 kit are likely to need replacement over time?

The assorted hoses, hose barb fittings and hose clamps wear with repeated pressure cycles and should be inspected regularly; the 2-1/2" dual-scale gauge may also require recalibration if dropped.

What pressure limit does the 36250 gauge reach first during a sustained test?

The gauge tops out at 100 psi (7 bar), so any system pressure above that will hit the scale limit before the test can be completed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.