SF Cable
SF Cable 35 ft Cat6 550 MHz Flat Patch Cable Black
Flat 35 ft Cat6 patch cable with 550 MHz bandwidth, 1.2 mm thickness and 50 micron gold-plated RJ45 plugs for tight spaces
- TypeCable
- Flat 1.2 mm profile slides under carpets and behind furniture
- 100 % bare copper conductors avoid CCA aluminium wire
- 50 micron gold-plated RJ45 contacts resist corrosion
- Cat6 550 MHz bandwidth supports demanding network applications
- 35 ft length reaches distant devices without extra couplers
What this cable is and who it serves
This flat Cat6 patch cable runs 35 ft and is rated for 550 MHz bandwidth. The 1.2 mm profile slips under carpets, behind furniture and along walls for a tidy home or office network. It uses 100 % bare copper conductors with 50 micron gold-plated RJ45 plugs and contains no CCA aluminium wire.
Check your setup before ordering
Verify that your router, switch, patch panel or modem accepts standard RJ45 connectors wired to the T568B (AT&T 258A) pinout. The cable is UTP unshielded twist-pair with a CM-type PVC jacket, so ensure your environment does not require shielded or plenum-rated cabling. Confirm the 35 ft length reaches between your devices without excess slack.
Thermals noise and power draw
Passive copper construction generates no heat and produces no audible noise during operation. The slim 32 AWG stranded conductors add negligible voltage drop across the 35 ft run, so power-over-Ethernet devices receive full specified current. The flat PVC jacket promotes airflow in dense rack wiring without trapping warmth.
Highlights
- Flat 1.2 mm profile slides under carpets and behind furniture
- 100 % bare copper conductors avoid CCA aluminium wire
- 50 micron gold-plated RJ45 contacts resist corrosion
- Cat6 550 MHz bandwidth supports demanding network applications
- 35 ft length reaches distant devices without extra couplers
Specifications
| Brand | SF Cable |
|---|---|
| Type | Cable |
Questions about this item
Does the 35 ft flat cable arrive ready to plug in or do I need separate connectors?
The cable is terminated with 50 micron gold plated RJ45 plugs on both ends so no extra connectors are required.
Should I pick a different length or category for a 35 ft run at 550 MHz?
This 35 ft Cat6 patch cable is rated for 550 MHz bandwidth; choose a shorter length only if the run is shorter.
What does the 550 MHz rating mean when the cable is installed in a rack?
The 550 MHz bandwidth supports high frequency signalling for gigabit and multi gigabit links over the full 35 ft length.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
WAWEIS
WAWEIS power adapter for AmazonBasics SB210 2.1 Channel Bluetooth Sound Bar
$15.99
0.00018432BTC
In stock
