We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4-pin Molex male to dual 15-pin SATA female splitter cables, 20cm, braided, 18AWG copper, 2 pack

SDTC Tech E-4PINM-15PINF-2 4 Pin Male Molex to Dual 15 Pin Female SATA Power Splitter Cable 18AWG 20cm 2 Pack

SKU CH-J61F-YJARN

Converts a 4-pin Molex connector into two 15-pin SATA power ports using 18AWG copper cable, 20cm each, supplied as a 2-pack

  • TypeSATA
  • ColorBlack
  • Length20
  • Connector Detail4
  • Terminal GenderMale-to-Female
  • ConductorCopper
  • Powers two SATA drives from one Molex connector
  • 18AWG copper conductors handle drive current reliably
  • 20 cm length keeps cable routing tidy
  • Braided jacket protects wires inside the case
  • Two cables included for multiple drive upgrades

What the adapter does

This splitter converts a single four-pin Molex connector into two fifteen-pin SATA power sockets. It lets you run two hard drives or solid-state drives from one legacy power supply output. The pack contains two twenty-centimetre cables for desktop builds or drive upgrades.

Thermals, noise and power

The copper conductors use 18AWG 1007 wire rated for the current drawn by typical SATA drives. No active cooling is present so the cable adds no noise. Power delivery depends entirely on the host supply and the connected drives.

Fifteen-pin SATA limit

Each cable ends in two fifteen-pin SATA power connectors and cannot power devices that need a different power interface. Builders whose drives or backplanes require another connector type will need a separate adapter.

Highlights

  • Powers two SATA drives from one Molex connector
  • 18AWG copper conductors handle drive current reliably
  • 20 cm length keeps cable routing tidy
  • Braided jacket protects wires inside the case
  • Two cables included for multiple drive upgrades

Specifications

BrandSDTC Tech
ModelE-4PINM-15PINF-2
TypeSATA
ColorBlack
Length20
Connector Detail4
Terminal GenderMale-to-Female
ConductorCopper
FeaturesBraided

Questions about this item

How do I connect the 4-pin male Molex end to my power supply and the two 15-pin female SATA ends to my drives?

Plug the 4-pin male Molex connector directly into a free Molex port on the power supply, then attach each 15-pin female SATA connector to the power port on a SATA hard drive, SSD, or optical drive. The 20cm cable length requires the drives to be close to the PSU.

Will the 18AWG copper conductors or the braided sleeving need replacement after extended use?

The 18AWG copper conductors and black braided sleeving are passive components with no moving parts; they do not have a scheduled maintenance interval or replacement cycle under normal operation.

What is the maximum power draw the splitter can handle before the 18AWG wires become a limit?

The 18AWG copper wires set the practical current limit for the splitter; total combined draw from both SATA devices must stay within the safe ampacity of 18AWG conductors to avoid voltage drop or heating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.