Schneider Electric
Schneider Electric LC2D09B7V contactor 1NC/1NO 24V AC 3P 9A 20A
A 24 V AC reversing contactor rated 9 A inductive and 20 A resistive with 1 NO and 1 NC auxiliary contacts, screw-clamp terminals and DIN-rail or plate mounting
- Controls 9 A inductive and 20 A resistive loads
- Operates on 24 V AC coil voltage
- Three-pole IEC contactor with reversing capability
- Two auxiliary contacts in 1NO/1NC configuration
- Mounts on DIN rail or plate with screw clamp terminals
Schneider Electric LC2D09B7V Contactor
This Schneider Electric LC2D09B7V is an IEC magnetic contactor rated for 9 A inductive and 20 A resistive loads. It operates on a 24V AC coil and provides three power poles plus one normally-open and one normally-closed auxiliary contact. The unit is designed for motor starting and power switching in industrial control panels.
Installation and Common Issues
The contactor mounts on a DIN rail or plate and uses screw clamp terminals for wiring. Its compact body measures 3.03 in high by 3.54 in wide, fitting standard panel layouts. Ensure the coil voltage matches your control circuit exactly; a mismatch will prevent operation or damage the coil. Verify the 9 A inductive rating suits the motor load to avoid premature contact wear.
Suitability and Alternatives
This contactor suits builders needing a reversing-capable IEC starter for 240V AC three-phase motors up to 2 hp. It is not for applications requiring higher full-load currents or different coil voltages. Buyers who need more auxiliary contacts or a specific NEMA enclosure rating should look at other models.
Highlights
- Controls 9 A inductive and 20 A resistive loads
- Operates on 24 V AC coil voltage
- Three-pole IEC contactor with reversing capability
- Two auxiliary contacts in 1NO/1NC configuration
- Mounts on DIN rail or plate with screw clamp terminals
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
How do I confirm the TeSys Deca contactor is operating correctly after wiring the 24V AC coil?
Energise the 24V AC coil and listen for a clean mechanical click; then measure continuity across the three main poles to verify they close, and check the 1NO auxiliary contact closes while the 1NC opens.
What comes in the box with the LC2D09B7V and what must I source separately?
The contactor itself with screw-clamp terminals and DIN-rail mounting hardware is included; you must supply the 24V AC control circuit wiring, main power conductors rated for 9A inductive or 20A resistive loads, and any overload relay.
Which coil voltage version should I select for a 24V AC control panel?
Choose the LC2D09B7V with its 24V AC coil; it matches the panel voltage directly and provides 2 hp at 240V AC three-phase with 9A inductive and 20A resistive ratings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
