Satco
Satco S11824 10.5W 120V Adjustable CCT 5-6 in Light Kit
Adjustable-color 10.5 W LED retrofit downlight with 90-degree beam for 5-6 in. openings
- Adjustable CCT lets you set the mood with one fixture
- 5W LED output keeps energy use low
- 90-degree beam angle focuses light where you need it
- Gimbaled design allows precise directional aiming
- Fits 5-6 in recessed housings for easy retrofit
10.5W Adjustable CCT Retrofit Downlight
The Satco S11824 is a 10.5 watt LED directional retrofit downlight with a gimbaled design. It offers adjustable color temperature and a 90 degree beam angle for focused illumination. The fixture operates on 120 volts and fits 5 to 6 inch recessed housings. It suits homeowners updating existing cans with efficient directional light.
Fits 5-6 Inch Housings on 120V Circuits
This retrofit kit installs directly into compatible 5 to 6 inch recessed cans without a separate housing. The 120 volt input connects to standard residential wiring, freeing the builder from specifying a dedicated low voltage driver. Its gimbaled mechanism allows the light head to tilt for accent or task aiming. The aluminum construction aids heat dissipation within the enclosed ceiling cavity.
Sustained Output With Aluminum Heat Management
Under continuous operation the aluminum body draws heat away from the LED array to maintain stable output. The 10.5 watt draw remains constant, avoiding the surge current of older lamp types on the same circuit. California Proposition 65 notices apply because the product contains a chemical known to the state to cause cancer and birth defects or other reproductive harm. The fixed 90 degree beam keeps spill light consistent over time.
Highlights
- Adjustable CCT lets you set the mood with one fixture
- 5W LED output keeps energy use low
- 90-degree beam angle focuses light where you need it
- Gimbaled design allows precise directional aiming
- Fits 5-6 in recessed housings for easy retrofit
Specifications
| Brand | SATCO |
|---|
Questions about this item
How hot does the 10.5W LED get after hours of continuous use?
The aluminum housing acts as a heat sink, keeping the 10.5W LED cool enough for sustained operation in insulated ceilings.
What is the audible noise level of the driver when the light runs all day?
The integrated driver operates silently with no fan or moving parts, producing no audible hum or buzz during extended use.
Does the 5-6 in gimbaled retrofit require a separate housing or junction box to install?
It fits directly into an existing 5-6 inch recessed housing and connects to the 120V supply wires inside the junction box.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



