We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 30in SATA III cable with straight 7-pin connectors on both ends

SATAGear

SATAGear SS-075MSS SATA III cable 30in straight-to-straight

SKU CH-PD77-NF62R

A 30-inch internal SATA III cable with straight 7-pin connectors supports 6.0 Gbps data transfer for drives and optical devices

  • 6 Gbps throughput with SATA 3.0 revision
  • 30-inch length suits full-tower drive placement
  • Shielded cable blocks EMI and RFI noise
  • Narrow profile improves case airflow
  • Dual 7-pin female connectors fit standard SATA ports

What this cable connects

The SATAGear SS-075MSS is a 30in internal SATA III cable with straight 7-pin female connectors on both ends. It links a Serial ATA hard drive, optical drive or other SATA device to a motherboard or controller card. The narrow profile simplifies routing inside a desktop or server chassis.

Deciding specification

The cable supports SATA revision 3.0, delivering up to 6.0 Gbps data throughput. That speed rating is the single figure that determines whether the link can saturate a modern SSD or mechanical drive. If your controller or device is limited to an earlier revision the cable will still work but at the lower rate.

Behaviour under sustained load

Shielded construction protects the signal against EMI and RFI during continuous transfers. The slim design keeps airflow unobstructed around densely packed drives, helping the system maintain stable temperatures when multiple devices operate simultaneously.

Highlights

  • 6 Gbps throughput with SATA 3.0 revision
  • 30-inch length suits full-tower drive placement
  • Shielded cable blocks EMI and RFI noise
  • Narrow profile improves case airflow
  • Dual 7-pin female connectors fit standard SATA ports

Specifications

ModelSS-075MSS

Questions about this item

What does the 6.0 Gbps rating mean once the cable is installed in a desktop?

The 6.0 Gbps rating is the maximum theoretical throughput of the SATA revision 3.0 interface; actual transfer speed depends on the drive and controller capabilities.

Which SATA standard does this cable meet and what does it cap in practice?

The cable meets Serial ATA 1.0 standards and supports the SATA revision 3.0 interface, which caps data throughput at 6.0 Gbps.

What physical space and connectors are needed to fit this 30in straight-to-straight cable?

The cable is 30in long with dual 7-pin female connectors; it requires a straight SATA port on the motherboard or controller and a straight port on the drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.