We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 20in SATA cable with one straight and one right-angle connector

SATAGear

SATAGear SS-05MSR SATA cable 20in straight to right angle

SKU CH-KF6T-W89SM

Connects SATA drives to a controller at up to 6.0 Gbps with a 20 in straight-to-right-angle shielded cable

  • Cable Length1.66 ft.
  • Straight-to-right-angle connectors simplify tight drive-bay routing
  • 20in length reaches drives without excess cable clutter
  • Narrow shielded design improves airflow and blocks EMI/RFI
  • Supports 6.0 Gbps SATA III transfer rates
  • Dual 7-pin female connectors fit standard SATA devices

What the cable connects

This 20-inch SATA cable links a Serial ATA drive or optical unit to a motherboard or controller using dual 7-pin female connectors. The straight-to-right-angle layout suits tight drive bays and crowded server chassis. Builders who need longer reach or external eSATA ports should choose a different cable.

How the right-angle end helps

The right-angle connector reduces strain on the drive port and keeps the cable flat against the PCB, simplifying routing in multi-drive arrays. Shielded construction limits EMI and RFI interference during high-speed transfers. The narrow profile leaves more room for airflow compared with legacy ribbon cables.

Limits of the SATA 1.0 interface

Rated to the SATA 1.0 specification, the cable supports data rates up to 6.0 Gbps, though actual throughput depends on the host controller and drive capabilities. The 1.66 ft length meets internal cabling guidelines but may not span full-tower layouts without slack management. No active signal conditioning is included.

Highlights

  • Straight-to-right-angle connectors simplify tight drive-bay routing
  • 20in length reaches drives without excess cable clutter
  • Narrow shielded design improves airflow and blocks EMI/RFI
  • Supports 6.0 Gbps SATA III transfer rates
  • Dual 7-pin female connectors fit standard SATA devices

Specifications

ModelSS-05MSR
Cable Length1.66 ft.

Questions about this item

Will the 7-pin connectors on this 20in cable need replacement over time?

The dual 7-pin female connectors are rated for standard SATA insertion cycles and typically last the life of the drive unless physically damaged.

What throughput ceiling appears first when this cable runs at 6.0 Gbps continuously?

The SATA 1.0-compliant design caps sustained throughput at 6.0 Gbps, so the interface specification is the first limit reached.

Does the narrow 1.66 ft shielded cable run hot or add noise inside a server chassis?

The shielded, narrow profile improves internal airflow and adds no active components, so it produces no noise and negligible heat.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.