SATAGear
SATAGear SS-043SS SATA III cable 17in straight-to-straight
Connects SATA drives to controllers at up to 6.0 Gbps with a shielded, narrow 17in straight-to-straight cable
- ColorBlack
- Length11" - 15"
- Cable Length1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in.
- Up to 6.0 Gbps throughput with SATA 3.0 support
- Straight-to-straight 7-pin female connectors for direct drive-to-controller links
- Narrow black cable improves case airflow and eases routing
- Shielded construction protects signals from EMI and RFI interference
- 17 in length suits typical desktop and server drive placements
SATA III cable for internal drives
This 17-inch straight-to-straight cable connects a Serial ATA hard drive, optical drive or other SATA device to a motherboard or controller. It supports the 6.0 Gbps data rate defined by the SATA 3.0 revision. The narrow, shielded design simplifies routing inside a desktop or server chassis. Both ends carry a 7-pin female connector.
Fits tight routing and multi-drive builds
At roughly 11 to 15 inches the cable reaches nearby ports without excess slack that blocks airflow. The slim profile frees space around crowded drive cages and lets cool air move past stacked drives. Shielding guards the signal against EMI and RFI in dense configurations. No additional adapters are required for standard 7-pin SATA headers.
Passive link draws no extra power
The cable carries only the signalling lines so it adds no thermal load and produces no noise. Signal integrity is maintained up to the 6.0 Gbps ceiling under normal desktop or server workloads. Builders who need right-angle connectors, longer runs or external eSATA ports should choose a different model.
Highlights
- Up to 6.0 Gbps throughput with SATA 3.0 support
- Straight-to-straight 7-pin female connectors for direct drive-to-controller links
- Narrow black cable improves case airflow and eases routing
- Shielded construction protects signals from EMI and RFI interference
- 17 in length suits typical desktop and server drive placements
Specifications
| Model | SS-043SS |
|---|---|
| Color | Black |
| Length | 11" - 15" |
| Cable Length | 1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in. |
Questions about this item
How does the 17in length affect signal integrity at 6.0 Gbps?
The 17in cable meets SATA 3.0 specification and is shielded against EMI/RFI, so the 6.0 Gbps throughput is maintained at this length.
Does the shielding and narrow design keep the cable cool during continuous operation?
The narrow, shielded construction improves internal airflow and reduces EMI/RFI, helping the cable run cool even with all-day use.
Will the dual 7-pin female connectors fit my motherboard SATA ports and SSD?
Yes, both ends are standard 7-pin female SATA connectors compatible with motherboard controllers and SATA drives.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
