We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 17-inch SATA cable with right-angle connectors at both ends

SATAGear

SATAGear SS-043RR 17in SATA Cable Right to Right Angle

SKU CH-VMP3-97H2D

A 17-inch internal SATA cable with right-angle connectors on both ends for tight drive bays, supporting 6.0 Gbps data rates and shielded against EMI/RFI

  • Cable Length1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in.
  • Right-angle connectors fit tight drive bays
  • 17-inch length reaches across full-tower cases
  • 0 Gbps bandwidth supports modern SSDs
  • Narrow shielded cable improves chassis airflow
  • Dual 7-pin female ends connect drive to controller

Right-Angle SATA Cable for Tight Builds

The SATAGear SS-043RR is a 17in internal SATA device cable with right-angle 7-pin female connectors on both ends. It links Serial ATA hard drives, optical drives or other SATA devices to a host controller. The right-to-right orientation suits cramped drive bays or back-to-back drive stacking where straight plugs would foul adjacent components.

Shielded Narrow Design Aids Airflow

A slim, shielded jacket reduces bulk compared with legacy ribbon cables, easing routing and improving case airflow. EMI and RFI shielding protects signal integrity up to the 6.0 Gbps SATA interface limit. Dual female 7-pin ends lock securely, so vibration in desktop or server chassis does not unseat the connection during daily operation.

Replaces Straight or Left-Angle Cables in Dense

Use this cable when a straight plug blocks a neighbouring slot or a left-angle forces the cable across a GPU. The 1.41 ft length reaches most motherboard-to-drive runs without excess slack. It is not suited for external eSATA ports or for builders who need a straight-to-right or straight-to-straight connector pairing.

Highlights

  • Right-angle connectors fit tight drive bays
  • 17-inch length reaches across full-tower cases
  • 0 Gbps bandwidth supports modern SSDs
  • Narrow shielded cable improves chassis airflow
  • Dual 7-pin female ends connect drive to controller

Specifications

ModelSS-043RR
Cable Length1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in.

Questions about this item

What SATA revision does the SS-043RR cable support and what is the maximum data rate?

The cable meets the Serial ATA 1.0 standard and supports data transfer rates up to 6.0 Gbps.

What are the connector angles and how much clearance do they need?

Both ends have right-angle (down) 7-pin female connectors, allowing the cable to run parallel to the drive or motherboard in tight spaces.

How do I orient the right-angle connectors during installation?

Align the L-shaped key on each 7-pin female connector with the corresponding notch on the device and controller ports, then press straight in until seated.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.