We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 14-inch SATA cable with straight and left-angle connectors

SATAGear

SATAGear SS-035SL SATA cable 14in straight to left angle

SKU CH-BFJZ-N822B

14-inch SATA cable with straight-to-left-angle connectors for tight drive bays, rated to 6.0 Gbps

  • Cable Length1.16 ft.
  • 14-inch length fits tight drive bays
  • Left-angle connector eases routing in cramped cases
  • 0 Gbps bandwidth supports fast SATA drives
  • Shielded design reduces EMI and RFI interference
  • Narrow profile improves internal airflow

Straight-to-left SATA cable

The SATAGear SS-035SL is a 14-inch internal SATA cable with a straight connector on one end and a left-angled connector on the other. It links a Serial ATA drive or optical unit to a motherboard or controller port. The angled end helps route the cable in tight spaces around expansion cards or drive cages.

6.0 Gbps headroom

The cable supports data transfer rates up to 6.0 Gbps, matching the SATA 1.0 specification cited in the technical data. It handles modern SSDs and mechanical drives at full interface speed. The limit appears only when a device or controller negotiates a faster standard that this cable does not carry.

Shielded narrow build

A slim, shielded jacket reduces bulk and protects signals from EMI and RFI. Dual 7-pin female connectors seat firmly without latch clips. The narrow profile eases routing behind drive bays and leaves more room for airflow inside the chassis. The fixed 1.16 ft length suits typical desktop or server drive-to-board runs.

Highlights

  • 14-inch length fits tight drive bays
  • Left-angle connector eases routing in cramped cases
  • 0 Gbps bandwidth supports fast SATA drives
  • Shielded design reduces EMI and RFI interference
  • Narrow profile improves internal airflow

Specifications

ModelSS-035SL
Cable Length1.16 ft.

Questions about this item

Will the SS-035SL left-angle connector fit alongside older SATA 1.0 drives in a tight server chassis?

Yes, the cable meets Serial ATA 1.0 standards and its 14 in narrow design simplifies routing next to legacy drives.

How can I verify the SS-035SL is delivering 6.0 Gbps after installation?

Check the negotiated link speed in your OS disk utility or BIOS; it should report 6.0 Gbps for a SATA 6 Gbps device on this shielded cable.

Does the SS-035SL box include mounting clips or only the 1.16 ft dual 7-pin female cable?

Only the 14 in straight-to-left-angle SATA cable is included; mounting clips or additional adapters must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.