We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 14-inch SATA cable with right-angle connectors both ends

SATAGear

SATAGear SS-035RR SATA Cable 14in Right to Right Angle

SKU CH-X68V-DZX74

A 14-inch internal SATA cable with right-angle connectors on both ends supports 6.0 Gbps data rates and a narrow shielded design for improved airflow

  • Cable Length1.16 ft.
  • Right-angled connectors fit tight drive bays
  • 14-inch length reaches nearby ports cleanly
  • 0 Gbps bandwidth handles fast SSDs
  • Shielded cable blocks EMI and RFI noise
  • Narrow profile improves case airflow

Right-angle SATA cable for tight builds

The SATAGear SS-035RR is a 14in internal cable with right-angle connectors on both ends. It links a Serial ATA drive or optical unit to a motherboard or controller where straight plugs would foul adjacent components. The 7-pin female sockets lock onto standard SATA ports without adapters.

Thermals noise and power

Passive copper construction adds no heat, noise or power draw to the system. The narrow, shielded jacket reduces electromagnetic interference and leaves more room for air to move past densely packed drives. No active cooling or extra connectors are required.

Build quality and daily use

Shielded conductors meet the Serial ATA 1.0 specification and support signalling up to 6.0 Gbps. The right-to-right orientation keeps the cable flat against the drive and board, easing routing in cramped server or desktop chassis. Dual 7-pin female ends plug directly into host and device ports.

Highlights

  • Right-angled connectors fit tight drive bays
  • 14-inch length reaches nearby ports cleanly
  • 0 Gbps bandwidth handles fast SSDs
  • Shielded cable blocks EMI and RFI noise
  • Narrow profile improves case airflow

Specifications

ModelSS-035RR
Cable Length1.16 ft.

Questions about this item

How do I install the SS-035RR cable with its right-angle connectors?

Align each 7-pin female connector with the SATA port on the motherboard and the drive, then press straight down until the metal latch clicks. The right-angle shape points the cable downward, so route it before securing the drive to avoid bending the connector.

What maintenance or replacement will this 14in SATA cable need later?

The shielded cable has no moving parts and requires no scheduled maintenance. Replace it only if the latch breaks, the pins bend, or signal errors appear after years of use.

What limit appears first on this cable during sustained 6.0 Gbps transfers?

The 1.16 ft length meets the Serial ATA 1.0 specification, so signal integrity remains within spec. The first practical limit is usually the drive or controller throughput, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.