We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4-inch SATA cable with straight and left-angle connectors

SATAGear

SATAGear SS-01MSL 4in SATA cable straight to left angle

SKU CH-RSZS-0Q0C5

A 4-inch internal SATA cable with a straight connector on one end and a left-angle connector on the other, supporting data rates up to 6.0 Gbps

  • Cable Length4 in.
  • Left-angled connector eases tight drive bays
  • 4-inch length reduces cable clutter inside case
  • Narrow profile improves internal airflow
  • Shielded design protects against EMI and RFI
  • Supports up to 6.0 Gbps data transfer

SATAGear SS-01MSL 4in SATA cable

This internal SATA device cable connects a Serial ATA drive or optical unit to a SATA controller. The 4-inch length suits tight routing inside desktops or servers with multiple drives. Dual 7-pin female connectors provide a direct link for high-speed storage devices.

Straight to left-angle connector layout

The left-angle plug on one end eases insertion beside neighbouring ports or drive cages. A straight plug on the other end fits standard motherboard or controller headers. Narrow cable construction simplifies routing and leaves more room for airflow inside the chassis.

Shielded cable for signal integrity

Shielding protects the link against EMI and RFI during normal operation. The design meets Serial ATA 1.0 standards and supports data rates up to 6.0 Gbps. Passive construction draws no extra power and adds no audible noise to the system.

Highlights

  • Left-angled connector eases tight drive bays
  • 4-inch length reduces cable clutter inside case
  • Narrow profile improves internal airflow
  • Shielded design protects against EMI and RFI
  • Supports up to 6.0 Gbps data transfer

Specifications

ModelSS-01MSL
Cable Length4 in.

Questions about this item

Does the 6.0 Gbps rating hold steady when the cable runs at full speed for hours?

The cable meets the SATA 1.0 standard and is shielded against EMI/RFI to maintain signal integrity at 6.0 Gbps during sustained transfers.

Will the shielding and narrow design keep heat and noise low in a packed server chassis?

The narrow profile improves internal airflow and the shielding reduces interference, helping keep temperatures stable without adding audible noise.

Do I need a motherboard with a 7-pin SATA port and a drive with a matching 7-pin connector?

Yes, both ends use 7-pin female connectors, so your controller and device must each provide a standard 7-pin SATA interface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.