We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA cable 30 inches straight to right angle connectors

SATAGear

SATAGear R-SS-075MSR SATA cable 30in straight to right angle

SKU CH-RYP4-3EZSW

Connects SATA drives at up to 6.0 Gbps with a straight-to-right-angle layout that eases routing and airflow

  • Right-angle connector eases tight drive bays
  • Narrow 30in cable improves case airflow
  • Shielded design guards against EMI/RFI
  • 0 Gbps throughput matches SATA 1.0 spec
  • Dual 7-pin female ends fit drives and controllers

Straight-to-Right-Angle SATA Cable

This 30-inch internal cable carries a straight 7-pin female connector on one end and a right-angle 7-pin female connector on the other. It links Serial ATA hard drives, optical drives or other SATA devices to a motherboard or controller card. The narrow profile eases routing in desktops or servers that hold multiple drives.

SATA 6.0 Gbps Interface Limit

The cable supports the Serial ATA 1.0 specification and data rates up to 6.0 Gbps. Throughput will not exceed that ceiling, so drives capable of faster protocols will run at this speed. Shielding guards against EMI and RFI to keep signals clean at the maximum rate.

Shielded Narrow Build for Dense Builds

A slim, shielded jacket reduces bulk, improves airflow and simplifies installation in tight drive bays. The right-angle plug points downward to relieve strain on crowded motherboard headers. Dual 7-pin female ends fit standard SATA ports without adapters.

Highlights

  • Right-angle connector eases tight drive bays
  • Narrow 30in cable improves case airflow
  • Shielded design guards against EMI/RFI
  • 0 Gbps throughput matches SATA 1.0 spec
  • Dual 7-pin female ends fit drives and controllers

Specifications

ModelR-SS-075MSR

Questions about this item

Straight-to-right-angle or straight-to-straight — which R-SS-075MSR version do I need?

This model is a straight-to-right-angle cable; choose it when the drive connector faces sideways or downward and a straight plug would foul the case or adjacent cards.

Will the 6.0 Gbps rating actually give me 6.0 Gbps throughput on my SSD?

The cable supports the SATA III 6.0 Gbps signalling rate; real-world throughput depends on the drive and controller, but the cable itself will not bottleneck a SATA III device.

Does the 7-pin SATA connector work with my motherboard's SATA ports?

Yes — both ends are standard 7-pin female SATA connectors, matching the SATA 1.0 specification used on virtually all desktop and server motherboards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.