We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 30 inch SATA cable with straight and left-angle connectors

SATAGear

SATAGear R-SS-075MSL 30in Red SATA Cable Straight to Left Angle

SKU CH-2M2M-ZQZKV

A 30-inch internal SATA cable with straight-to-left-angle connectors supporting up to 6.0 Gbps data transfer

  • Connect at up to 6.0 Gbps with SATA 1.0 compliance
  • Left-angle connector eases routing in tight drive bays
  • Narrow cable design improves internal airflow
  • Shielded construction guards against EMI and RFI
  • 30-inch length suits full-tower and server chassis

Purpose & fit

The SATAGear R-SS-075MSL is a 30in red internal SATA cable with a straight connector on one end and a left-angled connector on the other. It suits builders who need to route a drive connection around tight motherboard headers or stacked expansion cards without bending the cable sharply.

Thermals, noise & power

The narrow, shielded design reduces bulk inside the chassis, helping air move past drives and other components. As a passive copper link it draws no power and adds no noise, while the shielding guards the 6.0 Gbps signal path from EMI and RFI interference during sustained transfers.

Build & daily use

Dual 7-pin female connectors lock securely to SATA ports on the board and the device, meeting the Serial ATA 1.0 standard. The left-angle plug keeps the cable running parallel to the PCB, easing routing in multi-drive desktops or servers where space behind the drive cage is limited.

Highlights

  • Connect at up to 6.0 Gbps with SATA 1.0 compliance
  • Left-angle connector eases routing in tight drive bays
  • Narrow cable design improves internal airflow
  • Shielded construction guards against EMI and RFI
  • 30-inch length suits full-tower and server chassis

Specifications

ModelR-SS-075MSL

Questions about this item

How do I install the 30in red SATA cable with its straight and left-angle 7-pin connectors?

Plug the straight 7-pin female end into the motherboard SATA port and the left-angle 7-pin female end into the drive; route the narrow shielded cable so it does not block airflow, and press each connector firmly until it clicks.

What maintenance or replacement will this SATA cable need over time?

The shielded 7-pin SATA cable has no moving parts; inspect it when upgrading drives and replace it only if the connectors feel loose or the jacket shows cuts or kinks.

What limit appears first when this cable runs at 6.0 Gbps continuously?

The 30in length and shielding meet the Serial ATA 1.0 specification for 6.0 Gbps signal integrity, so the practical limit is the drive or controller speed, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.