We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
30-inch SATA cable with right-angle connectors both ends

SATAGear

SATAGear R-SS-075MRR SATA cable 30in right-angle to right-angle 6.0 Gbps

SKU CH-YGEB-RW7PG

A 30-inch internal SATA cable with right-angle connectors at both ends, supporting 6.0 Gbps data transfer and a shielded, narrow design for improved airflow

  • Right-angle connectors simplify tight drive bays
  • 30 inch length reaches across full-size cases
  • 0 Gbps throughput matches SATA 6G controllers
  • Shielded cable reduces EMI and RFI noise
  • Narrow profile improves internal airflow

Cable purpose and fit

This 30 in SATA cable carries data between a host controller and a Serial ATA drive at up to 6.0 Gbps. Both ends use a right-angle 7-pin female connector that points downward, so the cable suits tight drive bays or stacked drives where a straight plug would hit the chassis or an adjacent card. Builders who need a left-angle or straight connector will need a different cable.

Signal integrity under load

The shielded construction limits EMI and RFI while the narrow profile keeps airflow clear around densely packed drives. Rated to the Serial ATA 1.0 standard, the link sustains 6.0 Gbps transfers during long sequential reads or writes without the signal degradation that can appear on unshielded ribbon cables in busy enclosures.

Build and daily handling

Dual 7-pin female ends lock securely to drive and motherboard ports, and the right-angle moulding reduces strain when the chassis side panel closes. The slim jacket eases routing behind motherboard trays and between drive cages, helping installers keep cable management tidy in both desktop and server builds.

Highlights

  • Right-angle connectors simplify tight drive bays
  • 30 inch length reaches across full-size cases
  • 0 Gbps throughput matches SATA 6G controllers
  • Shielded cable reduces EMI and RFI noise
  • Narrow profile improves internal airflow

Specifications

ModelR-SS-075MRR

Questions about this item

Does the 30in SATA cable generate noticeable heat or noise during continuous all-day operation?

The passive 30in SATA cable has no active components, so it produces no noise and negligible heat while transferring data at up to 6.0 Gbps.

What host interface must my system already provide for this cable to work?

Your motherboard or controller card needs a standard 7-pin SATA port to accept the right-angle female connector on either end.

Will this right-angle SATA cable fit alongside older Parallel ATA ribbon cables in the same chassis?

The narrow 30in design improves airflow and routes easily past legacy ribbon cables without blocking drive bays or fans.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.