We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 17-inch SATA cable with straight and right-angle connectors

SATAGear

SATAGear R-SS-043SR SATA Cable 17in Straight to Right Angle

SKU CH-9SCR-3VTF7

A 17-inch SATA cable with straight and right-angle connectors for internal drives, supporting 6.0 Gbps transfer rates

  • Cable Length1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in.
  • Supports 6.0 Gbps data rates for fast transfers
  • Right-angle to straight connectors ease tight-space routing
  • Narrow cable design improves internal airflow
  • Shielded construction protects against EMI/RFI interference
  • Dual 7-pin female connectors fit standard SATA devices

Connection layout

The SATAGear R-SS-043SR is a 17in internal cable with a straight 7-pin connector on one end and a right-angle 7-pin connector on the other. It links a Serial ATA drive or optical device to a motherboard or controller port.

Build constraints

The right-angle plug suits tight spaces behind drive cages or alongside large graphics cards where a straight connector would foul the chassis. Builders who need two straight ends or a left-angle orientation should choose a different cable.

Bandwidth headroom

The cable supports data rates up to 6.0 Gbps, matching the SATA 1.0 specification, so it handles modern SSDs and hard drives without bottleneck. The shielded, narrow construction also keeps airflow clear in multi-drive servers.

Highlights

  • Supports 6.0 Gbps data rates for fast transfers
  • Right-angle to straight connectors ease tight-space routing
  • Narrow cable design improves internal airflow
  • Shielded construction protects against EMI/RFI interference
  • Dual 7-pin female connectors fit standard SATA devices

Specifications

ModelR-SS-043SR
Cable Length1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in.

Questions about this item

What SATA controller port does the R-SS-043SR cable plug into?

The cable uses a standard 7-pin female connector that fits any motherboard or add-in card SATA port.

Will this 17in cable reach a drive mounted in a lower bay on an older board?

At 17 inches the straight-to-right-angle layout reaches most lower drive bays without stretching.

How do I confirm the link runs at 6.0 Gbps after connecting the cable?

Check the BIOS or OS drive information; it should report a SATA 6.0 Gbps negotiation for the attached device.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.