We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
17-inch SATA cable with right-angle and left-angle connectors

SATAGear

SATAGear R-SS-043RL SATA Cable 17in Right to Left Angle

SKU CH-KCS9-BFGR3

A 17-inch internal SATA cable with right-to-left angled connectors for tight drive bays

  • Cable Length1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in.
  • Right-angled connector simplifies routing in tight cases
  • Left-angled end eases access on crowded motherboards
  • 17 in length fits mid-tower and server chassis
  • Shielded cable protects signals from EMI and RFI
  • Supports 6.0 Gbps transfer for fast drive performance

Cable orientation and fit

The SATAGear R-SS-043RL is a 17in internal SATA cable with a right-angle connector on one end and a left-angle connector on the other. It links a Serial ATA hard drive, optical drive or other SATA device to a motherboard or controller card. The angled ends help route the cable cleanly in tight chassis corners.

Airflow, noise and power

The narrow, shielded cable body reduces bulk inside the case so air can move past it more freely. No fan or active component is present, so the cable adds no audible noise. It carries only the low-voltage SATA signal, drawing negligible power from the host controller.

Sustained data transfer

The cable meets the Serial ATA 1.0 standard and supports signalling rates up to 6.0 Gbps. Shielding protects the differential pairs from EMI and RFI during continuous operation. Dual 7-pin female connectors maintain a secure link for long file copies or server workloads without signal degradation.

Highlights

  • Right-angled connector simplifies routing in tight cases
  • Left-angled end eases access on crowded motherboards
  • 17 in length fits mid-tower and server chassis
  • Shielded cable protects signals from EMI and RFI
  • Supports 6.0 Gbps transfer for fast drive performance

Specifications

ModelR-SS-043RL
Cable Length1.41 ft. / 1.08 ft. / 10.23 in. / 8.66 in.

Questions about this item

How do I route the 17in right-to-left angle SATA cable in a tight case?

Connect the right-angle (down) end to the drive and the left-angle (up) end to the motherboard port; the 1.08 ft narrow shielded cable simplifies routing and improves airflow.

Will the EMI-shielded 7-pin connectors degrade over time?

The shielded 7-pin female connectors meet SATA 1.0 standards and are rated for 6.0 Gbps; no periodic replacement is required under normal desktop or server use.

At what sustained throughput does the 1.41 ft cable hit its 6.0 Gbps limit?

The cable supports up to 6.0 Gbps Serial ATA signalling; sustained transfers at that rate are within specification for compatible drives and controllers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.