We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
8-inch SATA cable with right-angle connectors on both ends, flat shielded ribbon

SATAGear

SATAGear R-SS-02MRR 8in SATA cable right-angle to right-angle 6.0 Gbps

SKU CH-TJYP-DMN2E

Connects SATA drives with dual right-angle 7-pin female connectors at 6.0 Gbps

  • Right-angle connectors simplify routing in tight cases
  • 0 Gbps transfer rate supports high-speed SATA drives
  • Narrow shielded cable improves airflow and reduces EMI
  • Dual 7-pin female connectors fit standard SATA ports
  • Meets SATA 1.0 specification for broad compatibility

Right-angle SATA cable for tight builds

The SATAGear R-SS-02MRR is an 8-inch internal SATA device cable with right-angle connectors on both ends. It links a Serial ATA hard drive or optical drive to a SATA controller in desktops or servers. The dual 7-pin female design suits builders who need a short, angled run between drive and motherboard.

6.0 Gbps headroom for mechanical drives

The cable supports data transfer rates up to 6.0 Gbps, matching the SATA 1.0 standard. That bandwidth is ample for mechanical hard drives and optical drives, which rarely saturate the link. It will not add speed to faster solid-state drives that exceed the interface limit.

Shielded narrow profile aids airflow

A shielded, narrow cable body reduces EMI and RFI while simplifying routing inside a crowded chassis. The slim form leaves more room for air movement compared with wide ribbon cables. No active cooling or power draw is involved.

Highlights

  • Right-angle connectors simplify routing in tight cases
  • 0 Gbps transfer rate supports high-speed SATA drives
  • Narrow shielded cable improves airflow and reduces EMI
  • Dual 7-pin female connectors fit standard SATA ports
  • Meets SATA 1.0 specification for broad compatibility

Specifications

ModelR-SS-02MRR

Questions about this item

Will the right-angle connectors on this R-SS-02MRR cable clear the SATA ports on my older motherboard?

Both ends use a right-angle 7-pin female design that points downward, so they fit tight spaces around legacy SATA controllers without blocking adjacent ports.

How can I verify the cable is delivering 6.0 Gbps throughput after installation?

Check the negotiated link speed in your BIOS or operating system drive properties; a SATA 6.0 Gbps connection will report 6 Gb/s when the drive and controller both support it.

Does the package include any mounting brackets or extra adapters for a desktop build?

The box contains only the 8-inch shielded SATA cable with dual 7-pin female connectors; no brackets, screws or adapters are supplied.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.