We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A six-foot shielded cable with straight eSATA and right-angle SATA connectors

SATAGear

SATAGear eSATA-iL-2M SATA cable 6 ft

SKU CH-T25X-7XGJ8

A shielded 6 ft cable connects an eSATA port to an internal SATA drive and meets SATA 150, 300 and 600 specifications

  • Cable Length6 ft.
  • Connects SATA and eSATA devices with a 6 ft cable
  • Supports SATA 150 300 and 600 speeds for broad compatibility
  • Shielded construction maintains signal integrity over the full length
  • Rated for 1.5 A current and 30 V voltage for reliable power delivery
  • Operates from -55 °C to +105 °C for demanding environments

Purpose and Audience

The SATAGear eSATA-iL-2M is a six-foot cable that connects an external eSATA type I port to an internal SATA type L connector. It suits builders who need to link an external drive enclosure or docking station to a motherboard or controller inside the case.

Who It Is Not For

Buyers whose equipment uses a different external connector such as eSATA type II or a USB interface cannot use this cable. Systems that require an internal-to-internal SATA link or a shorter run for tight cable management should consider other options.

Deciding Specification

The cable meets SATA Gen 1, Gen 2 and Gen 3 electrical specifications, supporting 150, 300 and 600 MB/s signalling rates. Its 100-ohm differential impedance and shielding preserve signal integrity across the full six-foot length.

Highlights

  • Connects SATA and eSATA devices with a 6 ft cable
  • Supports SATA 150 300 and 600 speeds for broad compatibility
  • Shielded construction maintains signal integrity over the full length
  • Rated for 1.5 A current and 30 V voltage for reliable power delivery
  • Operates from -55 °C to +105 °C for demanding environments

Specifications

ModeleSATA-iL-2M
Cable Length6 ft.

Questions about this item

What connectors are on each end of the 6 ft cable?

One end has a SATA L-type connector and the other end has an eSATA I-type connector for external connections.

Does this 6 ft cable support SATA 6 Gb/s speeds?

Yes, it meets SATA Gen 1 through Gen 3 specifications covering 150, 300 and 600 MB/s transfer rates.

What voltage and current can the cable contacts handle?

The contacts are rated for 1.5 A at 30 V with insulation resistance of 1000 Mohms and differential impedance of 100 ohms.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.