We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with right-angle 15-pin SATA plug and 4-pin Molex socket

SATAGear

SATAGear 15-Pin SATA to 4-Pin Molex Power Adapter Cable

SKU CH-V32T-RK7EA

Converts a 4-pin Molex power connector to a 15-pin SATA power plug for SATA drives

  • Connector Detail1 x SATA to 1 x SATA
  • Converts legacy Molex power to SATA drives
  • Right-angle plug fits tight drive bays
  • 15-pin SATA connector supports SATA and SATA II
  • 6-inch length reduces cable clutter inside case
  • New condition ensures reliable power delivery

Right-Angle SATA Power Adapter

This 15-pin SATA to 4-pin Molex adapter lets you power a SATA drive from a legacy power supply connector. It suits builders adding a SATA SSD or hard drive to a system that only offers Molex power leads. The right-angle plug eases routing in tight drive bays or behind motherboard trays.

Simple Press-Fit Installation

Push the Molex female end onto a power-supply lead and the SATA male end onto the drive until both seat firmly. The only common issue is reversing the Molex connector; the keyed shape prevents damage but the drive will not spin up until it is flipped. No tools or drivers are required.

Check Power-Supply Connectors First

Verify that your power supply has an unused 4-pin Molex lead before ordering. If the unit only provides SATA power plugs, this adapter is unnecessary and will not fit. Also confirm the drive uses a standard 15-pin SATA power port rather than a proprietary connector.

Highlights

  • Converts legacy Molex power to SATA drives
  • Right-angle plug fits tight drive bays
  • 15-pin SATA connector supports SATA and SATA II
  • 6-inch length reduces cable clutter inside case
  • New condition ensures reliable power delivery

Specifications

Connector Detail1 x SATA to 1 x SATA

Questions about this item

How do I confirm the adapter is delivering power to the SATA drive after connecting it?

The drive should spin up and appear in the system BIOS or operating system once the 15-pin SATA connector is seated and the Molex plug is powered.

What connectors are included on the cable and what additional parts are needed?

The cable has a 4-pin Molex female connector on one end and a 15-pin SATA power plug on the other; a free Molex lead from the power supply is required.

Which version of this adapter should I choose for a SATA II hard drive?

This adapter converts a standard 4-pin Molex connector to the 15-pin SATA power interface used by SATA and SATA II drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.