We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SATACables

SATACables SS-POW-EXT12 12 inch 22-pin SATA extension cable

SKU CH-K6F0-Y41WP

A 12 inch 22-pin SATA extension cable carries both power and data to extend internal backplane connections

  • Extends reach by 12 inches with 22-pin SATA male-to-female connector
  • Combines power and data in a single 22-pin SATA extension cable
  • Designed for backplane-to-drive connections inside chassis
  • Supports internal-to-external SATA routing for flexible builds
  • 100 % tested for reliable pin-to-pin signal integrity

Extension Length and Pin Count

This 12 inch cable provides a 22 pin SATA extension with male to female connectors. It carries both power and data signals in a single assembly. The 12 inch reach helps route connections around larger chassis or backplane installations.

Backplane Builders and Internal to External Runs

Installers extending backplane connections or running SATA signals from an internal port to an external bracket will find the pin 1 to pin 1 wiring convenient. Builders who need a different length or a right angle connector should look at other options because this model is only offered in the 12 inch straight configuration.

Connector Clearance and Pin Orientation

Verify that the male and female 22 pin headers have enough physical clearance around adjacent components on your backplane or motherboard. Confirm that pin 1 alignment matches your device because the cable follows a straight through pinout. The product is supplied new and 100 percent tested.

Highlights

  • Extends reach by 12 inches with 22-pin SATA male-to-female connector
  • Combines power and data in a single 22-pin SATA extension cable
  • Designed for backplane-to-drive connections inside chassis
  • Supports internal-to-external SATA routing for flexible builds
  • 100 % tested for reliable pin-to-pin signal integrity

Specifications

ModelSS-POW-EXT12

Questions about this item

What type of SATA port must my motherboard or backplane provide for this 22-pin male connector to fit?

The cable requires a standard 22-pin SATA port that carries both data and power on a single connector.

Will this 12-inch extension work with an older drive that uses separate data and power plugs?

No, the 22-pin female end combines data and power, so it only mates with drives that have a single 22-pin SATA connector.

How can I verify the extension is functioning correctly after I connect it?

The drive should be detected in BIOS or the operating system and transfer data without errors; every cable is 100% tested before shipping.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.