We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Y-split cable: one 4-pin Molex to three 15-pin SATA power connectors, 12 inch total length, mixed straight and right-angle plugs

SATACables

SATACables PWS2ESD 12 inch 15-pin SATA Y Power Cable, Three SATA Power from One MOLEX 4-pin Input

SKU CH-6J5V-MX15Y

Converts one 4-pin Molex connector into three 15-pin SATA power plugs for multiple drives

  • Powers multiple drives from one Molex connector
  • 12-inch cable reaches drives across the case
  • Right-angle plugs fit tight drive bays
  • Straight plug suits open connectors
  • Three 15-pin SATA outputs expand power options

Three SATA power from one Molex

This adapter converts a single 4-pin Molex connector into three 15-pin SATA power plugs. It suits builders adding multiple SATA drives without spare SATA headers on the power supply. The 12-inch cable splits into two branches for flexible routing inside the case. One branch ends in a straight plug and the other carries two right-angle plugs spaced 6 inches apart.

For adding SATA power only

It works for systems that still provide Molex outputs and need extra SATA power connections. Builders whose power supplies lack Molex connectors or who need more than three SATA plugs should look elsewhere. The adapter does not convert data signals or support other drive interfaces.

12-inch split cable with straight and right-angle

The total length is 12 inches divided into two segments. One segment carries a straight 15-pin plug and the other carries two right-angle 15-pin plugs placed 6 inches apart. This layout determines whether the cable reaches your drive bays cleanly.

Highlights

  • Powers multiple drives from one Molex connector
  • 12-inch cable reaches drives across the case
  • Right-angle plugs fit tight drive bays
  • Straight plug suits open connectors
  • Three 15-pin SATA outputs expand power options

Specifications

ModelPWS2ESD

Questions about this item

What power supply connector do I need for the 4-pin Molex input?

Your power supply must provide a standard 4-pin Molex output to plug into the adapter's input.

Can I keep using my existing Molex devices while adding this adapter?

Yes, the adapter draws from one Molex connector so other Molex devices on separate connectors remain unaffected.

How do I verify the three 15-pin SATA plugs are delivering power after setup?

Each connected SATA drive should spin up and be recognised by the system BIOS or operating system.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.