SATACables
SATACables LP30SR991 39 Inch Low Profile Right to Straight SATA III 6.0 Gbps Cable
A 39-inch low-profile SATA cable with a right-angle to straight connector layout, rated for 6.0 Gbps data transfer and shielded against EMI/RFI
- Up to 6.0 Gbps throughput with SATA revision 3.0
- Backwards compatible with 1.5 Gbps SATA devices
- Low-profile right-angle connector improves internal airflow
- Shielded silver-mesh sleeve resists EMI and RFI
- Vibration-resistant latching ensures a secure point-to-point link
What this cable connects
The SATACables LP30SR991 is a 39 inch internal SATA cable with a straight connector on one end and a right-angle connector on the other. It links a motherboard or controller to Serial ATA hard drives, optical drives or other SATA devices inside a PC, notebook or server chassis.
Signal quality over distance
Shielded construction and a flexible rubber sleeve protect the signal from EMI and RFI while the cable is routed through tight spaces. The point-to-point dedicated bus topology maintains consistent throughput during sustained transfers at 1.5, 3.0 or 6.0 Gbps without the crosstalk seen in ribbon-style alternatives.
Speed rating that decides fit
Rated for SATA revision 3.0 at 6.0 Gbps, the cable is backwards compatible with 1.5 Gbps and 3.0 Gbps devices. If your drive or controller only supports the 1.5 Gbps generation, this part will still work, but a 6 Gbps-rated link is required to reach the highest throughput.
Highlights
- Up to 6.0 Gbps throughput with SATA revision 3.0
- Backwards compatible with 1.5 Gbps SATA devices
- Low-profile right-angle connector improves internal airflow
- Shielded silver-mesh sleeve resists EMI and RFI
- Vibration-resistant latching ensures a secure point-to-point link
Specifications
| Model | LP30SR991 |
|---|
Questions about this item
Does the 39 inch length and low-profile right-angle connector affect airflow or heat inside the case?
The 39 inch cable uses a low-profile right-angle connector and a flexible rubber sleeve to reduce bulk, which increases airflow inside the case for better cooling during all-day operation.
What must the motherboard or host controller provide for this LP30SR991 cable to work?
The cable requires a standard Serial ATA host port on the motherboard or controller; it connects point-to-point between that host and a SATA device such as a hard drive or optical drive.
Will this 6.0 Gbps SATA III cable work with my older 1.5 Gbps SATA I hard drive?
Yes, the cable is backwards compatible with SATA 1.5 Gbps devices and will operate at the drive's native 150 Mbps transfer rate.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115201BTC
In stock
