We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 31 inch SATA cable with low-profile right-angle and straight connectors

SATACables

SATACables LP30SR787 31 Inch Low Profile Right to Straight SATA Cable

SKU CH-2Z7M-TRD4Y

A 31 inch low-profile SATA cable with right-angle and straight connectors, shielded for EMI protection and rated for 6.0 Gbps throughput

  • Supports up to 6.0 Gbps data throughput with SATA revision 3.0
  • Low-profile right-angle connector improves airflow inside the case
  • Shielded silver-mesh sleeve protects against EMI and RFI interference
  • Flexible rubber jacket allows tight bends and neat cable routing
  • Backwards compatible with 1.5 Gbps SATA devices for wide device support

SATACables LP30SR787 31 Inch SATA Cable

This 31 inch internal SATA cable connects a motherboard host port to a hard drive or optical device. The low profile right angle connector on one end and straight connector on the other suit tight spaces in notebooks and servers. Yellow jacket aids identification.

Practical limits of the SATA 6 Gbps interface

The cable supports the SATA revision 3.0 specification for up to 6 Gbps throughput. It is backwards compatible with 1.5 Gbps and 3.0 Gbps devices so older drives will function at their rated speed. Shielded construction protects against EMI and RFI interference.

Right angle to straight connector orientation

The right angle plug routes the cable parallel to the drive while the straight end inserts into the motherboard. This fixed orientation cannot be swapped so verify the port layout before ordering. Builders needing a straight to straight or left angle design should select a different cable.

Highlights

  • Supports up to 6.0 Gbps data throughput with SATA revision 3.0
  • Low-profile right-angle connector improves airflow inside the case
  • Shielded silver-mesh sleeve protects against EMI and RFI interference
  • Flexible rubber jacket allows tight bends and neat cable routing
  • Backwards compatible with 1.5 Gbps SATA devices for wide device support

Specifications

ModelLP30SR787

Questions about this item

Which length of the LP30SR787 cable should I pick for a standard ATX build?

The cable measures 31 inches and is the single length offered for this model.

What real-world throughput can I expect from the 6.0 Gbps rating once the cable is installed?

It supports up to 600 MB/s and is backwards compatible with 1.5 Gbps and 3.0 Gbps SATA devices.

Does the SATA III interface on this cable cap the speed of a modern SSD?

The SATA III 6.0 Gbps interface limits maximum throughput to 600 MB/s, which is the ceiling for any SATA SSD.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.